4. Click
schedule configuration is the same as the setting of the arming schedule for motion detection.
Refer to Step 5 in Section 6.1.1 Configuring Motion Detection.
5. Click
Email, Notify Surveillance Center, and Trigger Alarm Output are selectable. Refer to Step 6 in
Section 6.1.1 Configuring Motion Detection.
6. Click
6.1.3 Configuring Video Loss Alarm
Steps:
1. Enter the Video Loss setting interface:
Configuration > Event > Basic Event > Video Loss
2. Check the Enable checkbox to enable the video loss detection.
3. Click
schedule configuration is the same as the setting of the arming schedule for motion detection.
Refer to Step 5 in Section 6.1.1 Configuring Motion Detection.
4. Click
Email, Notify Surveillance Center, and Trigger Alarm Output are selectable. Refer to Step 6 in
Section 6.1.1 Configuring Motion Detection.
5. Click
User Manual of PanoVu Series Network Camera
tab to enter the arming schedule setting interface. The arming
tab to select the linkage method taken for the video loss alarm. Send
to save the settings.
Figure 6-8 Video Loss
tab to enter the arming schedule setting interface. The arming
tab to select the linkage method taken for the video loss alarm. Send
to save the settings.
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
71