Setting Pos (Position Selector) - Eclipse AVN20D Manual

Basic operation
Adjusting sound quality

Setting POS (position selector)

The stereophonic position for obtaining optimum acoustic effects can be adjusted to match
the number and position of passengers.
In addition, front-to-back, right-to-left volume balance can be adjusted for the selected
position.

Touching the image of a seat
shown on the
will change the position.
• The selected position will change its
color to orange. Touching the seat
again will cancel the selection. The
four positions shown by the table
below can be set.
• Touching
• After making settings, touch
return to the previous operation screen.
Touch switch
• This setting cannot be done at the same time as adjustment of the volume
balance (see next page).
• The main unit is configured for vehicles with a left-side driver's position.
26
POS setting screen
OFF
will cancel all settings.
BACK
Function
Acoustics optimized for
driver's seat
Acoustics optimized for
passenger's seat
. The position will be saved and the system will
Touch switch Function
Acoustics optimized for
both front seats
Acoustics optimized for
rear seats