Live Monitoring Menu - Speco D12LX Operation Instruction Manual

Operation Instruction

Live Monitoring Menu

Login/Logout
Selecting (Login) in the Live Monitoring menu accesses the Login screen, and you will be asked to select a User
and enter the password to log into the system. Selecting
screen asking you to confirm whether or not you want to log out the current user.
Monitor
Selecting (Monitor) in the Live Monitoring menu will allow you to select the monitor from Primary and Spot.
Selecting Primary displays
the selected monitor.
Display
 Camera: Selecting
screen. It is the same as pressing the individual camera buttons on the front panel or clicking the left mouse button
on a camera image when in one of the multiview formats (i.e., PIP, 2x2, 3x2, 3x3, 4x3, 4x4 or 5x4). Clicking the
left mouse button on the screen again returns to the previous display mode.
You can change the location of the PIP (Picture-in-Picture) counterclockwise or clockwise by pressing
the Up and Down arrow buttons and change its size by pressing the Left and Right arrow buttons.
To change its location and size by using the mouse, select the PIP and then click the right mouse
button to display the following menu. Select the options you want. You can also change the location
of the PIP by clicking the left mouse button on the PIP window and dragging it to where you want
it located, and change the size of the PIP by clicking the left mouse button at the corner of the PIP
window and dragging it until it is the desired
 Screen Format: Selecting
the selected multiview screen mode (PIP, 2x2, 3x2, 3x3, 4x3, 4x4 or 5x4). Selecting each display mode is the same
as pressing the
MODE
 Previous Group, Next Group: Selecting
or next page.
 Edit Group: Selecting
Active Cameo Mode section for details.
 Camera OSD, Status OSD: Selecting
or Status OSD On and Off.
Freeze
Selecting (Freeze) in the Live Monitoring menu will freeze the current image on the screen until you select
While in the Freeze mode, the icon
(OSD tab).
Alarm
Selecting (Alarm) in the Live Monitoring menu resets the DVR's outputs including the internal buzzer during an
alarm. It is the same as pressing the
Digital Deterrent
Selecting (Digital Deterrent) in the Live Monitoring menu displays the following setup screen and allows the DVR
to play manually.
62
and Spot displays
. You can select the screen format and sequence monitoring of
(Display) → Camera and choosing the camera number displays the selected camera full
size.
(Display) → Screen Format and choosing the screen mode displays the cameras in
button or scrolling the mouse wheel up and down when in one of the multiview formats.
(Display) → Previous Group or Next Group moves to the previous
(Display) → Edit Group enters to the Active Cameo mode. Refer to the following
(Display) → Camera OSD or Status OSD toggles Camera OSD
displays in bottom-left corner if Freeze is selected in the Display setup screen
ALARM button.
(Logout) in the Live Monitoring menu displays the Logout
again.