System Log Notices; Troubleshooting - Speco D12LX Operation Instruction Manual

System Log Notices

Boot Up
Shutdown
Restart
Upgrade
Upgrade Fail
Power Failure
Time Change
Time Zone Change
Time Sync
Time Sync Fail
Disk Bad
Login
Logout
Setup Begin
Setup End
Remote Setup Change
Remote Setup Failure
Setup Imported
Setup Import Failure
Setup Exported

Troubleshooting

Problem
No Power
No Live Video
Live Video Very Bright
DVR has stopped recording
The icon displays,
however, the DVR is not
recording.
While upgrading the system,
the DVR keeps rebooting and
the upgrade fails.
Setup Export Failure
Setup Export Cancel
Schedule On
Schedule Off
Panic On
Panic Off
Clear All Data
Clear Disk
Format Disk
Disk Full
Disk Config Change
No storage found
Disk Added
Disk Removed
Auto Deletion
Search Begin
Search End
Clip-Copy Begin
Clip-Copy End
Clip-Copy Cancel
 Check power cord connections.
 Confirm that there is power at the outlet.
 Check camera video cable and connections.
 Check monitor video cable and connections.
 Confirm that the camera has power.
 Check camera lens settings.
If a cable is attached to the "Loop" connector, make certain it is connected to a
properly terminated device.
If hard disk drive is full, you will either need to delete video or set the DVR to the
Overwrite Mode.
When the DVR is in the Pre-Event recording mode, the yellow
when there is no event, and the DVR is not recording. The red
when any event occurs and the DVR starts recording.
If the current system version is higher than the upgrade package file version, you
should reset the DVR first using the Factory Reset. When using the Factory Reset,
you will lose any settings you have saved.
Clip-Copy Fail
Clip-Copy User:
Clip-Copy From:
Clip-Copy To:
Clip-Copy Duration of Video:
Clip-Copy Camera:
Mirror 1 (2) Started
Mirror 1 (2) Start Failed
Mirror 1 (2) Stopped
Mirror 1 (2) Stop Failed
Factory Reset
Login : VNC (server address)
Logout : VNC (server address)
Possible Solution
Digital Video Recorder
Callback Fail
Print Begin
Print End
Print Cancel
Archive On
Archive Off
and display
and display
95