Print; Disk Mirroring; Figure 55 : Print Screen - Speco D12LX Operation Instruction Manual

8/16 channel+4ip
Hide thumbs Also See for D12LX:
Table of Contents

Advertisement

Operation Instruction
You do not need to install any special software on your personal computer to review the video clips. Refer to Speco
Central Operation Instruction for instructions on how to review video clips you have copied.
NOTE: During Clip Copy, you cannot shut the system down, clear data on the storage device, or format the
storage device.
CAUTION: Do NOT disconnect the USB cable or the power from the external drive while copying
video clips. If the external drive is shut down or the USB cable is disconnected while
copying video clips, THE DVR SYSTEM MAY NOT WORK NORMALLY OR THE EXTERNAL
DRIVE COULD BE DAMAGED, and you will get an error message the next time you try
to copy video clips. You will need to power down the DVR and restart it to get rid of the
error message. Once the file system of the USB hard disk drive has been corrupted, this
error message cannot be dismissed. Even after restarting the DVR it may automatically
restart while preparing to clip copy. You must recover the file system using the recovery
program, or you must reformat the hard disk drive.

Print

You can print images on a printer. Connect a PostScript™ printer, or external hard disk drive or flash drive to one of
the USB ports.

Figure 55 : Print screen.

Once you have selected the printer model and paper size, highlight the Print button and press the
appears asking you if you want to print the current image. Highlight the Continue button and press the
NOTE: If your printer only supports an LPT connection (parallel), use an LPT to USB converter cable. The printer
cable is not provided.

Disk Mirroring

The DVR supports disk mirroring to prevent unexpected loss of recorded video data that might be caused by disk damage
or corruption. You can set up disk mirroring by highlighting Storage in the System menu and pressing the
80
Highlight the box beside Printer Model and press the
PostScript Printer will print images on a PostScript™ printer connected to
the DVR. Selecting File Printer will save the current image as a PDF file
on an external USB hard disk drive or flash drive.
NOTE: Images saved as PDF files can be printed on any printer connected
to your PC.
Highlight the box beside Paper Size and press the
the paper size.
button. Selecting
button. You can select
button. A message
button to print.
button.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

D20lx

Table of Contents