Operation Instruction
Remote Control Buttons
NOTE: For simplicity, the button descriptions in this manual refer to the front panel buttons.
ID Button
If a DVR System ID is set to 0, the infrared remote control will control that DVR without any additional operations.
(Refer to the System General setup screen in this chapter for further information on setting the System ID.) If the system
ID is 1 to 16, you must to press the
that DVR. If the System ID of two or more DVRs is set to 0, those DVRs will react to the infrared remote control at
the same time.
Camera Buttons
Pressing the individual camera buttons will cause the selected camera to display full screen. Buttons 1 to 9 are also
used to enter passwords.
Sequence Button
When in the Live Monitoring mode, pressing the
Login/Logout Button
Pressing the
LOGIN/OUT
10
Figure 4 : Infrared remote control.
button and then press the number button (1 to 16 (+10 & 6)) in order to control
ID
SEQUENCE
button displays the Login or Logout screen.
ID Button
Camera Buttons
Sequence Button
Login/Logout Button
Arrow Buttons
Menu Button
Playback Buttons
Alarm Button
Layout Button
Zoom Button
PTZ Button
Enter Button
Esc Button
PTZ Control Buttons
Copy Button
Play/Stop Button
button displays live channels sequentially.