Event Setup; Motion; Figure 19 : Event - Motion Setup Screen - Speco D12LX Operation Instruction Manual

Operation Instruction
NOTE: The archiving speed might be slower than the recording speed when a large quantity of recorded data
is being archived. In this case, the oldest data can be overwritten by the latest data being recorded.
To prevent data you want to keep from being overwritten, use the Summary Archive function, or set the
recorded image quality to Standard during the archiving process.

Event Setup

Motion

Highlight Motion and press the
Your DVR has built-in video motion detection. Video motion detection can be turned On or Off for each camera.
You can define the area of the image where you want to detect motion; e.g., a doorway. Highlight the box under the
Zone heading, and press the
Press the button to display the menu screen. The menu on the setup screen has the following functions:
32
button, and the Motion setup screen appears. (Local Cameras Only)
Figure 19 : Event – Motion setup screen.
Highlighting the box under the Sensitivity heading and pressing the
allows you to adjust the DVR's sensitivity to motion for Daytime and Nighttime
independently. There are five settings with 1 being the least sensitive and 5
being the most sensitive.
button. The Motion Detection Zone screen displays.
The Motion Detection Zone screen is laid over the video for
the selected camera. You can set up motion detection zones
by selecting or clearing blocks.
NOTE: You can set up motion zones one block at a time
in groups of 8 individual block groups. A block
group is positioned within the image area using
the Up and Down arrow buttons, and individual
blocks within the block groups are selected or
cleared using the camera buttons.
button