User; Figure 10 : System - User Setup Screen - Speco D12LX Operation Instruction Manual

Operation Instruction
Highlight the box beside Time Server and press the
the IP address or domain name of the time server. Highlighting
registered time servers.
NOTE: You can use the domain name instead of IP address if you already set up the DNS Server when setting
up the Network – IP Address.
Highlight the box beside Interval and press the
to 1 day at various time intervals.
Last Sync-Time displays the last time the DVR was synchronized with the time server.
Highlight Run as Server and press the
On, the DVR you are setting up will run as a time server.
Highlighting Holiday... and pressing the

User

Highlight User and press the
and delete groups and users. When adding a group, you can assign authority levels to the group.
The +/– column is used to collapse and expand user groups. If there is a + or – in this column, it indicates the item is
a Group Name. If there is a – in front of the Group Name, it indicates that the group has been "expanded" and all of
the User Names within that group are displayed below the Group Name. If there is a + in front of the Group Name, it
indicates that the group has been "collapsed" and all of the User Names within that group are hidden. To collapse or
expand a group, highlight the +/– column in front of the desired group and press the
Highlighting a Group Name and pressing the
22
button. A virtual keyboard appears that you can use to enter
button. Set the time interval for synchronization from 30 minutes
button. Pressing the
button displays the Holiday screen.
You can set up holidays by highlighting + and pressing the
date appears.
Highlight the month and day and change them by using the Up and Down arrow
buttons. Press the button to add the date. Dates can be deleted by highlighting
the beside the date and pressing the
NOTE: Holidays that do not fall on the same date each year should be updated
once the current year's holiday has passed.
button. The User setup screen displays the authorized groups and users. You can add
Figure 10 : System – User setup screen.
button allows you to change the authority levels assigned to the group.
allows you to select your time server from a list of
button toggles between On and Off. When it is
button.
button.
button. The current