Ip Address; Figure 27 : Network - Ip Address (Manual) Setup Screen - Speco D12LX Operation Instruction Manual

Operation Instruction

IP Address

Highlight IP Address and press the
Highlight the box beside Type and press the
DHCP and ADSL (with PPPoE). Select the desired type and press the
Selecting Manual from the Type allows you to set up LAN parameters manually.
Change the numbers by highlighting them and using the Up and Down arrow buttons to increase or decrease the number.
The factory default LAN settings are:
IP Address: 192.168.1.129
Gateway: 192.168.1.254
Subnet Mask: 255.255.255.0
NOTE: You will need to get the appropriate IP Address, Gateway and Subnet Mask from your network
administrator.
Highlight the box beside DNS Server. Press the Up and Down arrow buttons to set the IP address of the DNS server.
Highlight the Port Number Setup... box and press the
NOTE: You will need to get the appropriate Port Numbers for each Speco Central and Speco Remote related
program (Admin, Callback, Watch and Search) from your network administrator.
NOTE: The system restarts automatically after changing the port settings.
Do NOT use the same port number for two different programs, otherwise, the DVR cannot be connected
with the PC running Speco Central or Speco Remote.
CAUTION: When changing the port settings, you must change the port settings on the PC running
Speco Central as well. Refer to the Speco Central Operation Instruction for details.
40
button, and the IP Address setup screen displays.
Figure 27 : Network – IP Address (Manual) setup screen.
button. You can select the type of network configuration from: Manual,
Change the numbers by highlighting them and using the Up and Down
arrow buttons to increase or decrease the number. The factory default
Port settings are:
Remote Admin:
Remote Callback:
Remote Watch:
Remote Search:
button.
button. The Port Number Setup screen appears.
8200
8205
8201
8202