Speco D12LX Operation Instruction Manual page 71

Highlight the box beside Source name and press the
plays the selected file as the digital deterrent.
Panic
Selecting (Panic) in the Live Monitoring menu starts panic recording of all cameras, and selecting
panic recording.
Sequence
Selecting (Sequence) in the Live Monitoring menu causes the cameras to display sequentially. It is the same as
pressing the SEQ button. When in one of the multi-view formats, selecting
screen layouts (Full Sequence). Or, the bottom, right screen will display live cameras sequentially (Cameo Sequence).
For example, if you select
< Full Sequence >
Selecting again in the Live Monitoring menu exits the Sequence mode. While in the Sequence mode, the
displays in bottom-left corner if Sequence is selected in the Display setup screen (OSD tab). If all the cameras in a
page are Off, or have lost video or are set to Covert (unless the user has authority to view covert cameras), that page
will be excluded from the sequence.
NOTE: The Full Sequence for the full sequence monitoring and the Cameo Sequence for the cameo sequence
monitoring should be selected in the Display setup screen (Primary Monitor tab).
Camera Menu
 PTZ: Selecting (Camera Menu) → PTZ and choosing the camera number allows you to control the selected
camera as long as it has Pan, Tilt and Zoom capabilities. It is the same as pressing the
following PTZ Mode section for details.
 Zoom: Selecting (Camera Menu) → Zoom and choosing the camera number zooms the current image of the
selected camera on the screen. Refer to the following Zoom Mode section for details.
 Audio: Selecting (Camera Menu) → Audio toggles audio output On and Off.
 Mic: Selecting (Camera Menu) → Mic toggles the DVR's audio that is sent to the network device On and Off.
 Color Control: Selecting
control brightness, contrast, hue and saturation for each camera for the selected camera if a user who has Color Control
authority logs into the system. It is the same as pressing and holding a camera button for a few seconds.
 Information: Selecting
to check the information of the selected network camera.
NOTE: It is important that cameras and monitors are correctly installed and adjusted prior to making any image
adjustments using the DVR's controls.
Any image adjustments you make will be applied to both the live video on the monitors and the recorded
video.
The Camera Menu also can be displayed by clicking the right mouse button on the screen while in the
live monitoring mode.
Search
Selecting (Search) in the Live Monitoring menu exits the live monitoring mode and enters the search mode. It is
the same as pressing the
PLAY/STOP
button to select the source file to play. Highlighting Trigger
in the 2x2 format, the DVR changes pages as follows:
(Camera Menu) → Color Control and choosing the camera number allows you to
(Camera Menu) → Information and choosing the network camera number allows you
button.
Digital Video Recorder
will cause the DVR to go through predefined
< Cameo Sequence >
PTZ button. Refer to the
again stops
icon
63