3.4 PCI/PNP Setup
Select the PCI/PnP tab from the PCE-5124 setup screen to enter the Plug
and Play BIOS Setup screen. You can display a Plug and Play BIOS
Setup option by highlighting it using the <Arrow> keys. All Plug and
Play BIOS Setup options are described in this section. The Plug and Play
BIOS Setup screen is shown below.
3.4.1 Clear NVRAM
Set this value to force the BIOS to clear the Non-Volatile Random Access
Memory (NVRAM). The Optimal and Fail-Safe default setting is No.
3.4.2 Plug and play O/S
Set this value to allow the system to modify the settings for Plug and Play
operating system support. The Optimal and Fail-Safe default setting is
No.
PCE-5124 User Manual
Figure 3.11: PCI/PNP setup
54