Advantech PCE-5130 User Manual
  1. Manuals
  2. Brands
  3. Advantech Manuals
  4. Computer Hardware
  5. PCE-5130
  6. User manual
Advantech PCE-5130 User Manual

Advantech PCE-5130 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User Manual
PCE-5130
TM
Socket M Intel® Core
2 Duo /
TM
Core
Duo / Celeron-M
processor PICMG 1.3 CPU Board
with PCIe / DDR2 / VGA / Dual
GbE LAN

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PCE-5130 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Advantech PCE-5130

Summary of Contents for Advantech PCE-5130

  • Page 1 User Manual PCE-5130 Socket M Intel® Core 2 Duo / Core Duo / Celeron-M processor PICMG 1.3 CPU Board with PCIe / DDR2 / VGA / Dual GbE LAN...
  • Page 2 No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. How- ever, Advantech Co., Ltd.
  • Page 3 Caution! There is a danger of a new battery exploding if it is incorrectly installed. Do not attempt to recharge, force open, or heat the battery. Replace the battery only with the same or equivalent type recommended by the man- ufacturer. Discard used batteries according to the manufacturer’s instructions. PCE-5130 User Manual...
  • Page 4 DDR2 ELPIDA E5108AE- 1 GB DDR2 N 5C-E (64x8) ELPIDA DDR2 1 GB DDR2 N E5108AGBG-6E-E (64x8) ELPIDA DDR2 2 GB DDR2 N E1108ACSE-6E- E(128x8) DDR2 KVR667D Micron 7KE12 Kingston 2 GB DDR2 N 2N5/2G D9HNL (128x8) PCE-5130 User Manual...
  • Page 5 DDR2 TS5QNU2 DDR2 N 96D2-2G667-TR K4T1G084QD- 3451-6S ZCE6 (128x8) DDR2 TS256ML Micron 7HE12 DDR2 N Q64V6U D9HNL (128x8) SAMSUNG DDR2 TS256ML DDR2 N K4T1G084QA- Q64V6U ZCE6 (128x8) Network Feature Comparison LAN/Model PCE-5130G2 PCE-5130VG LAN1:Intel 82574 LAN2:Intel 82573 PCE-5130 User Manual...
  • Page 6 If an Advantech product is defective, it will be repaired or replaced at no charge dur- ing the warranty period. For out-of-warranty repairs, you will be billed according to the cost of replacement materials, service time and freight.
  • Page 7 It should be free of marks and scratches and in perfect working order upon receipt. As you unpack the PCE-5130, check it for signs of ship- ping damage. (For example, damaged box, scratches, dents, etc.) If it is damaged or it fails to meet the specifications, notify our service department or your local sales representative immediately.
  • Page 8 PCE-5130 User Manual viii...

  • Page 9: Table Of Contents

    Table 1.3: Connector list.............. 5 Board Layout: Jumper and Connector Locations........6 Figure 1.1 Jumper and connector locations......... 6 PCE-5130 Block Diagram ................. 7 Figure 1.2 PCE-5130 block diagram..........7 Safety Precautions ..................8 Jumper Settings ..................9 1.8.1 How to set jumpers ............... 9 1.8.2...
  • Page 10 Introduction ..................... 56 Windows XP Driver Setup............... 57 Chapter VGA Setup ......... 59 Introduction ..................... 60 Windows XP Driver Setup............... 60 Chapter LAN Configuration ......63 Introduction ..................... 64 Features....................64 Installation....................64 Win XP Driver Setup ................65 PCE-5130 User Manual...
  • Page 11 Table B.20:DMA channel assignments........85 B.21 Interrupt Assignments ................85 Table B.21:Interrupt assignments ..........85 B.22 1st MB Memory Map ................86 Table B.22:1st MB memory map ..........86 B.23 PCI Bus Map ................... 86 Table B.23:PCI bus map............. 86 PCE-5130 User Manual...
  • Page 12 Appendix C Programming the GPIO ....87 Supported GPIO Register ............... 88 C.1.1 GPIO registers ................88 C.1.2 GPIO example program-1............88 PCE-5130 User Manual...

  • Page 13: Chapter 1 Hardware Configuration

    Chapter Hardware Configuration...

  • Page 14: Introduction

    Introduction PCE-5130 is a PICMG 1.3 form-factor single host board which is designed with Intel 945GME, plus ICH7M-DH platform for industrial applications that require mainstream computing capability and low power consumption. PCE-5130 supports Intel Core 2 Duo, Core Duo and Celeron® M processors with FSB up to 667 MHz and DDR2 400/533/667 MHz SDRAM up to 4 GB.

  • Page 15: Specifications

    Supports single/dual 10/100/1000 Mbps Ethernet port(s) via the dedicated PCI Express x1 bus which provides 500 MB/s data transmission rate Controller: – LAN 1: Intel 82574 (G2 version or VG version) – LAN 2: Intel 82573 (G2 Version) PCE-5130 User Manual...

  • Page 16: Industrial Features

    Board weight: 0.490 kg Jumpers and Connectors Connectors on the PCE-5130 single host board link it to external devices such as hard disk drives and a keyboard. In addition, the board has a number of jumpers used to configure your system for your application.
  • Page 17 USB port 3, 4 SATA1 Serial ATA1 SATA2 Serial ATA2 CPU1 CPU Socket DIMMA1 Memory connector channel A DIMMB1 Memory connector channel B GPIO1 GPIO pin header (SMD pitch-2.0 mm) LVDS Panel Back Light Power Connector LVDS1 LVDS Connector PCE-5130 User Manual...

  • Page 18: Board Layout: Jumper And Connector Locations

    Board Layout: Jumper and Connector Locations Figure 1.1 Jumper and connector locations PCE-5130 User Manual...

  • Page 19: Pce-5130 Block Diagram

    PCE-5130 Block Diagram Figure 1.2 PCE-5130 block diagram PCE-5130 User Manual...

  • Page 20: Safety Precautions

    Caution! There is a danger of a new battery exploding if it is incorrectly installed. Do not attempt to recharge, force open or heat the battery. Replace the battery only with the same or equivalent type recommended by the man- ufacturer. Discard used batteries according to the manufacturer’s instructions. PCE-5130 User Manual...

  • Page 21: Jumper Settings

    1.8.2 CMOS clear (CMOS1) The PCE-5130 CPU card contains a jumper that can erase CMOS data and reset the system BIOS information. Normally this jumper should be set with pins 1-2 closed. If you want to reset the CMOS data, power off, disconnect, set J1 to 2-3 closed for just a few seconds, and then move the jumper back to 1-2 closed.
  • Page 22 PCE-5130 User Manual...

  • Page 23: Watchdog Timer Output (Jwdt1)

    1.8.3 Watchdog timer output (JWDT1) The PCE-5130 contains a watchdog timer that will reset the CPU or send a signal to IRQ11 in the event the CPU stops processing. This feature means the PCE-5130 can recover from a software failure or an EMI problem. The J2 jumper settings control the outcome of what the computer will do in the event the watchdog timer is tripped.
  • Page 24 1-2 open * default setting (JOBS1) is a 2-pin jumper that enables/disables the alarm for out-of-range on-board security (OBS) events, including fan speed, voltage, temperature, and case open. For parameter settings, see “PC Health Status” on page 51. PCE-5130 User Manual...

  • Page 25: Com2 Rs-232/422/485 Mode Selector (Jestcom2)

    (5-6) + (7-9) + (8-10) + (13-15) + (14-16) closed RS-422 (3-4) + (9-11) + (10-12) + (15-17) + (16-18) closed RS-485 (1-2) + (9-11) + (10-12) + (15-17) + (16-18) closed Note! RS-485 does not support auto flow control. PCE-5130 User Manual...
  • Page 26 PCE-5130 User Manual...

  • Page 27: System Memory

    To remove the memory module, just push both handles outward, and the memory module will be ejected. 1.11 Cache Memory CPUs supported by PCE-5130 have 4 MB, 2 MB and 1 MB L2 cache memory sizes. PCE-5130 User Manual...

  • Page 28: Processor Installation

    Warning! Without a fan or heat sink, the CPU will overheat and cause damage to both the CPU and the single board computer. To install a CPU, first turn off your system. Locate the processor socket 479. The PCE-5130 is designed for Intel Core 2 Duo/Core Duo/Core®-M processors (socket M) up to 2.33 GHz.
  • Page 29 Turn the screw to its original position. Use a small dab of thermal paste and install the heat sink on the CPU. The recessed area of the heat sink accommodates the capacitors, avoiding contact. PCE-5130 User Manual...
  • Page 30 PCE-5130 User Manual...

  • Page 31: Chapter 2 Connecting Peripherals

    Chapter Connecting Peripherals...

  • Page 32: Introduction

    Floppy Drive Connector (FDD1) You can attach up to two floppy disk drives to the PCE-5130’s onboard controller. You can use 3.5" (720 KB, 1.44 MB) drives. The motherboard comes with a 34-pin daisy-chain drive connector cable. On the board end of the cable is a 34-pin flat-cable connector.

  • Page 33: Parallel Port (Lpt1)

    Parallel Port (LPT1) The parallel port is normally used to connect the motherboard to a printer. The PCE- 5130 includes an onboard parallel port, accessed through a 26-pin flat-cable connec- tor, LPT1. PCE-5130 User Manual...

  • Page 34: Usb Ports (Usb12, Usb34)

    USB Ports (USB12, USB34) The PCE-5130 provides up to four USB (Universal Serial Bus) ports with complete Plug & Play and hot swap support for up to 127 external devices. These USB ports comply with USB Specification Rev. 2.0, support transmission rates up to 480 Mbps and are fuse protected.

  • Page 35: Vga Connector (Vga1)

    VGA Connector (VGA1) The PCE-5130 includes a VGA interface that can drive conventional CRT displays. VGA1 is a standard 15-pin D-SUB connector commonly used for VGA. Pin assign- ments for VGA1 are detailed in Appendix B. PCE-5130 User Manual...

  • Page 36: Serial Ports (Com1, Com2)

    Serial Ports (COM1, COM2) The PCE-5130 offers two serial ports. The user can use JSETCOM2 to select among RS-232/422/485 modes for COM2. These ports can connect to serial devices, such as a mouse or a printer, or to a communications network.

  • Page 37: Ps/2 Keyboard And Mouse Connector (Kbms1)

    Two on-board 6-pin mini-DIN connectors (KBMS1) provide connections to PS/2 key- board and mouse by the Y-cable (1700060202) in the package. The on-board KBMS2 pin header provides connection for the chassis front panel PS/ 2 keyboard and mouse connector. PCE-5130 User Manual...

  • Page 38: Cpu Fan Connector (Cpufan1)

    CPU Fan Connector (CPUFAN1) This connector supports cooling fans of 500 mA (6 W) or less. PCE-5130 User Manual...

  • Page 39: Front Panel Connectors (Jfp1, Jfp2 & Jfp3)

    Front Panel Connectors (JFP1, JFP2 & JFP3) There are several external switches to monitor and control the PCE-5130. PCE-5130 User Manual...

  • Page 40: Power Led And Keyboard Lock (Jfp3)

    Slow flashes 2.9.2 External speaker (JFP2) JFP2 is a 4-pin connector for an external speaker. The PCE-5130 provides an onboard buzzer as an alternative to an external speaker. To enable the buzzer, set pins 5 and 7 as closed. 2.9.3 Reset connector (JFP1) Many computer cases offer the convenience of a reset button.

  • Page 41: H/W Monitor Alarm (Jobs1)

    2.10 H/W Monitor Alarm (JOBS1) Closed: Enable OBS Alarm Open: Disable OBS Alarm PCE-5130 User Manual...

  • Page 42: Lan Ports (Lan1 & Lan2)

    2.11 LAN Ports (LAN1 & LAN2) The PCE-5130 is equipped with one or two high-performance 1000 Mbps Ethernet LANs. They are supported by all major network operating systems. The RJ-45 jacks on the rear plate provide convenient connectivity. Table 2.2: LAN LED indicators...

  • Page 43: High Definition Audio Module Interface

    2.12 High Definition Audio Module Interface This HDAUD1 pin header is the connection interface to Advantech's 7.1 channel high definition audio module. Note! Advantech 7.1 channel high definition audio module ordering informa- tion. P/N: PCA-AUDIO-HDA1E PCE-5130 User Manual...

  • Page 44: Gpio Header (Gpio1)

    2.13 GPIO Header (GPIO1) This is a 14-pin digital I/O header. Refer to Appendix B for detailed information on the pin assignments, and to Appendix C for the programming guide. PCE-5130 User Manual...

  • Page 45: Case Open Connector (Jcase1)

    2.14 Case Open Connector (JCASE1) The 2-pin case open connector is for any chassis with a case open sensor. When the case is open, the buzzer on the motherboard will sound. PCE-5130 User Manual...

  • Page 46: Front Panel Lan Indicator Connector (Lanled1)

    Green, on Yellow, flashing 1000Mbps Link off 100Mbps Link on Orange, on Yellow, on 100Mbps Link active Orange, on Yellow, flashing 100Mbps Link off 10Mbps Link on Yellow, on 10Mbps Link active Yellow, flashing 10Mbps Link off PCE-5130 User Manual...
  • Page 47 PCE-5130 User Manual...

  • Page 48: Serial Ata Interface (Sata1 ~ Sata2)

    2.16 Serial ATA Interface (SATA1 ~ SATA2) The PCE-5130 features high performance serial ATA interfaces (up to 150 MB/s); these long, thin cables ease cabling to hard drives or CD/DVD drives. These two on-board SATA ports can be configured as RAID 0, or 1. Please see the detailed BIOS setting instructions for this in Chapter 3.

  • Page 49: Award Bios Setup

    Chapter Award BIOS Setup...

  • Page 50: Introduction

    Entering Setup Turn on the computer and press <Del> to enter the BIOS setup. Figure 3.1 Award BIOS Setup initial screen PCE-5130 User Manual...

  • Page 51: Standard Cmos Setup

    The options are: No Errors/All Errors/All, But Keyboard/All, But Diskette/All, But Disk/Key Memory This category displays base memory, extended memory, and total memory detected during POST (Power On Self Test). Figure 3.2 Standard CMOS Features Screen PCE-5130 User Manual...

  • Page 52: Advanced Bios Features

    Min, 8 Min, 16 Min, and 32 Min. – Limit CPUID MaxVal Set Limit CPUID MaxVa1 to 3. This should be disabled for WinXP. – Execute Disable Bit When disabled, forces the XD feature flag to always return 0. PCE-5130 User Manual...
  • Page 53 To disable security, select PASSWORD SETTING in the main menu. Then, you will be asked to enter a password. Simply press <Enter> to disable security. When security is disabled, the system will boot and you can enter Setup freely. PCE-5130 User Manual...

  • Page 54: Advanced Chipset Features

    RAS (row address strobe) to CAS (column address strobe). The less the clock cycles are, the faster the DRAM speed is. Setting options are [2T] to [5T], and [Auto]. PCE-5130 User Manual...
  • Page 55 The On-Chip Frame Buffer Size can be set to 1 MB or 8 MB. This memory is shared with the system memory. DVMT Mode Displays the active system memory mode. DVMT / FIXED Memory Size Specify the size of DVMT / FIXED system memory to allocate for video memory. PCE-5130 User Manual...

  • Page 56: Integrated Peripherals

    1024x768, 18bit SC – 1028x1024, 18bit DC Init Display First Choose the first display interface to initiate while booting. The choice is “PCI Slot” or “Onboard”. Integrated Peripherals Figure 3.6 Integrated peripherals Figure 3.7 On-Chip IDE Device PCE-5130 User Manual...
  • Page 57 The PATA IDE mode must to be set to Secondary and SATA will display “P0, P2 is Primary". It means SATA0 and SATA2 act as Primary Channel.We have one configuration with this setting by spec, and can’t swap the channel. Figure 3.8 Onboard Device PCE-5130 User Manual...
  • Page 58 Disabled. Onboard Serial Port 1 The settings are “3F8/IRQ4”, “2F8/IRQ3”, “3E8/IRQ4”, “2E8/IRQ3”, and “Dis- abled” for the on-board serial connector. PCE-5130 User Manual...
  • Page 59 This selection is available only if you select “ECP” or “ECP + EPP” in the Paral- lel Port Mode field. In ECP Mode, you can select DMA channel 1 or DMA chan- nel 3. Leave this field on the default setting. PCE-5130 User Manual...

  • Page 60: Power Management Setup

    This category allows you to select the type (or degree) of power saving and is directly related to the following modes: – HDD Power Down – Suspend Mode There are three selections for Power Management, and they have fixed mode settings. PCE-5130 User Manual...
  • Page 61 Primary IDE 0 (1) and Secondary IDE 0 (1) When Enabled, the system will resume from suspend mode if Primary IDE 0 (1) or Secondary IDE 0 (1) becomes active. The choices are “Enabled” and “Dis- abled”. PCE-5130 User Manual...

  • Page 62: Pnp/Pci Configurations

    This is set to “Disabled” by default. Maximum Payload Size This allows you to set the maximum TLP payload size for PCI Express devices. The options are [128 bytes], [256 bytes], [512 bytes], [1024 bytes], [2048 bytes], and [4096 bytes]. PCE-5130 User Manual...

  • Page 63: Pc Health Status

    This shows the voltage of VCORE, +1.5V, +3.3, +5V, +12V, -12V, -5V, VBAT(V), and 5VSB(V). ACPI Shutdown Temperature The system will shut down automatically when the CPU temperature is over the selected setting. This function can prevent CPU damage caused by overheat- ing. PCE-5130 User Manual...

  • Page 64: Frequency / Voltage Control

    This is achieved by varying the frequency slightly so that the signal does not use any particular frequency for more than a moment. The choices are “Disabled” and “Enabled”. PCE-5130 User Manual...

  • Page 65: Password Setting

    This record is required for the system to operate. 3.13 Exit Without Saving Selecting this option and pressing <Enter> lets you exit the setup program without recording any new values or changing old ones. PCE-5130 User Manual...
  • Page 66 PCE-5130 User Manual...

  • Page 67: Chipset Software Installation Utility

    Chapter Chipset Software Installation Utility...

  • Page 68: Before You Begin

    Integrates superior video features. These include filtered sealing of 720 pixel DVD content, and MPEG-2 motion compensation for software DVD Note! This utility is used for the following versions of Windows, and it has to be installed before installing all the other drivers: Windows 2000 Windows XP PCE-5130 User Manual...

  • Page 69: Windows Xp Driver Setup

    INF” then click “infinst_autol.exe”. A message pops up telling you to install the CSI utility before other device drivers. Windows XP is used as an example in the following steps. Click “Next” when you see the following message. Click “Yes” when you see the following message. PCE-5130 User Manual...
  • Page 70 Click “Next” when you see the following message. When the following message appears, click “Finish” to complete the installation and restart Windows. PCE-5130 User Manual...

  • Page 71: Vga Setup

    Chapter VGA Setup...

  • Page 72: Introduction

    3D-intensive application requests it. DVMT balances memory allocation between applications and video, assuring optimum efficiency. LVDS Interface: PCE-5130 provides an 18-bit dual channel LVDS interface supporting up to WUXGA(1600X1200) panel resolution. Windows XP Driver Setup...
  • Page 73 You will see a welcome window. Please click “Yes” to continue the installation. Elect to restart the computer now or later, and click “Finish” to complete the installation. PCE-5130 User Manual...
  • Page 74 PCE-5130 User Manual...

  • Page 75: Lan Configuration

    Chapter LAN Configuration...

  • Page 76: Introduction

    Introduction The PCE-5130 has a single/dual Gigabit Ethernet LAN via dedicated PCI Express x1 bus (Intel® 82573/82574), which offers bandwidth of up to 500 MB/sec, eliminating the bottleneck of network data flow and incorporating Gigabit Ethernet to operate at 1000 Mbps.

  • Page 77: Win Xp Driver Setup

    "LAN" then click the proper LAN driver for the OS. Windows XP is used as an example in the following steps. Select "I accept the terms in the license agreement" and click "Next" to con- tinue. Click "Next" to continue. PCE-5130 User Manual...
  • Page 78 Click "Install Software" to start the installation procedure. The driver will be installed automatically and the LAN function will be enabled after the installation. PCE-5130 User Manual...

  • Page 79: Appendix A Programming The Watchdog Timer

    Appendix Programming the Watchdog Timer...

  • Page 80: Introduction

    Introduction The PCE-5130’s watchdog timer can be used to monitor system software operation and take corrective action if the software fails to function within the programmed period. This section describes the operation of the watchdog timer and how to pro- gram it.
  • Page 81 0. [default=0] Bit 4: Read status of watchdog timer, 1 means timer is “timeout”. Write this address to I/O port 2E (hex) to lock the watch- AA (hex) ----- dog timer 2. PCE-5130 User Manual...

  • Page 82: Example Program

    ; Set timeout interval as 10 seconds and start counting al,0f6h dx,al al,10 dx,al ;----------------------------------------------------------- Dec dx ; Lock W83627HF al,0aah dx,al Enable watchdog timer and set 5 minutes as timeout interval ;----------------------------------------------------------- Mov dx,2eh ; Unlock W83627HF Mov al,87h Out dx,al Out dx,al PCE-5130 User Manual...
  • Page 83 ; Lock W83627HF al,0aah dx,al Enable watchdog timer to be reset by mouse ;----------------------------------------------------------- Mov dx,2eh ; Unlock W83627HF Mov al,87h Out dx,al Out dx,al ;----------------------------------------------------------- Mov al,07h ; Select registers of watchdog timer dx,al al,08h dx,al ;----------------------------------------------------------- PCE-5130 User Manual...
  • Page 84 ; Select registers of watchdog timer dx,al al,08h dx,al ;----------------------------------------------------------- Dec dx ; Enable the function of watchdog timer al,30h dx,al al,01h dx,al ;----------------------------------------------------------- Dec dx ; Enable watchdog timer to be strobed reset by keyboard al,0f7h dx,al al,dx Or al,40h dx,al PCE-5130 User Manual...
  • Page 85 ; Enable the function of watchdog timer al,30h dx,al al,01h dx,al ;----------------------------------------------------------- Dec dx ; Generate a time-out signal al,0f7h dx,al ;Write 1 to bit 5 of F7 register al,dx Or al,20h dx,al ;----------------------------------------------------------- Dec dx ; Lock W83627HF al,0aah dx,al PCE-5130 User Manual...
  • Page 86 PCE-5130 User Manual...

  • Page 87: Appendix B I/O Pin Assignments

    Appendix I/O Pin Assignments...

  • Page 88: Floppy Drive Connector (Fdd1)

    Table B.1: Floppy drive connector (FDD1) Signal Signal FDHDIN* FDEDIN* INDEX* MOTOR 0* DRIVE SELECT 1* DRIVE SELECT 0* MOTOR 1* DIRECTION* STEP* WRITE DATA* WRITE GATE* TRACK 0* WRITE PROTECT* READ DATA* HEAD SELECT* DISK CHANGE* * low active PCE-5130 User Manual...

  • Page 89: Parallel Port Connector (Lpt1)

    Parallel Port Connector (LPT1) Table B.2: Parallel port connector (LPT1) Signal Signal STROBE* AUTOFD* INIT* SLCTINI* ACK* BUSY SLCT * low active VGA Connector (VGA1) Table B.3: VGA connector (VGA1) Signal Signal GREEN BLUE H-SYNC V-SYNC PCE-5130 User Manual...

  • Page 90: Serial Port (Com1)

    RS-232 Serial Port (COM1) Table B.4: RS-232 serial port (COM1) Signal RS 232/422/485 Serial Port (COM2) Table B.5: RS-232 / 422 / 485 serial port (COM2) Signal SOUT PCE-5130 User Manual...

  • Page 91: Usb Header (Usb12 ~ 34)

    USB Header (USB12 ~ 34) Table B.6: USB Header (USB12 ~ 34) Signal Signal USB1_VCC5 USB2_D+ USB2_VCC5 USB1_D- USB2_D- USB1_D+ PS/2 Keyboard/Mouse Connector (KBMS1) Table B.7: PS/2 keyboard/mouse connector (KBMS1) Signal KB DATA MS DATA KB CLOCK MS CLOCK PCE-5130 User Manual...

  • Page 92: External Keyboard Connector (Kbms2)

    Signal +12V Detect FANPWM B.10 Power LED and Keyboard Lock Connector (JFP3 / PWR_LED & KEY LOCK) Table B.10: Power LED and keyboard lock connector (JFP3 / PWR_LED & KEY LOCK) Signal LED power (+5 V) KEYLOCK# PCE-5130 User Manual...

  • Page 93: External Speaker Connector (Jfp2 / Speaker)

    SPK+ SPK_IN SPK- B.12 Reset Connector (JFP1 / RESET) Table B.12: Reset connector (JFP1 / RESET) Signal RESET # B.13 HDD LED (JFP2 / HDDLED) Table B.13: HDD LED (JFP2 / HDDLED) Signal IDE LED+ IDE LED- PCE-5130 User Manual...

  • Page 94: Atx Soft Power Switch (Jfp1 / Pwr_Sw)

    Hi-definition Audio Link Connector (HDAUD1) Table B.15: Hi-definition audio link connector (HDAUD1) Signal Signal ACZ_VCC ACZ_SYNC ACZ_BITCLK ACZ_SDOUT ACZ_SDIN0 ACZ_SDIN1 -ACZ_RST ACZ_12V B.16 SM Bus Connector (JFP2 / SNMP) Table B.16: SM bus connector (JFP2 / SNMP) Signal SMB_DATA SMB_CLK PCE-5130 User Manual...

  • Page 95: Lan1 And Lan2 Led Connector (Lanled1)

    Table B.17: LAN1 and LAN2 LED connector (LANLED1) Signal #LAN1_ACT #LAN2_ACT V33_AUX V33_AUX #LAN1_LINK1000 #LAN2_LINK1000 #LAN1_LINK100 #LAN2_LINK100 V33_AUX B.18 GPIO Header (GPIO1) Table B.18: GPIO header (GPIO1) Signal GPIO_1 GPIO_5 VCC_GPIO GPIO_2 GPIO_6 GPIO_3 GPIO_7 GPIO_4 GPIO_8 PCE-5130 User Manual...

  • Page 96: System I/O Ports

    Serial port 1 2F8-2FF Serial port 2 400-41F SM bus controller 480-4BF CPU card resource 400-4D1 CPU card resource 4E0-4E7 Serial port 6 4E8-4EF Serial port 4 4F0-4F7 Serial port 5 4F8-4FF Serial port 3 800-87F Power management PCE-5130 User Manual...

  • Page 97: Dma Channel Assignments

    Serial Port 3, 5 IRQ12 PS/2 mouse IRQ13 INT from co-processor IRQ14 Primary IDE Channel IRQ15 Secondary IDE Channel IRQ3 Serial communication port 2 IRQ4 Serial communication port 1 IRQ5 IRQ6 IRQ7 Parallel port 1 (print port) PCE-5130 User Manual...

  • Page 98: 1St Mb Memory Map

    REQ A PCI slot 2 AD30 INT C, D, A, B GNT B REQ B PCI slot 3 AD29 INT D,A,B,C GNT C REQ C PCI slot 4 AD28 INT A, B, C, D GNT D REQ D PCE-5130 User Manual...
  • Page 99 Appendix Programming the GPIO...
  • Page 100 Configure logical device 7(GP10~GP17), configuration register CRF0,CRF1,CRF2 --------------------------------------------------------------- MOV DX,4EH MOV AL,07H ; Point to Logical Device Number Reg. OUT DX,AL MOV DX,4FH MOV AL,07H ; Select logical device 7 OUT DX,AL ; MOV DX,4EH MOV AL,F0 OUT DX,AL MOV DX,4FH PCE-5130 User Manual...
  • Page 101 ;Set GPIO is normal not inverter OUT DX,AL; MOV DX,4EH MOV AL,F1H OUT DX,AL MOV DX,4FH MOV AL,??H ; Put the output value into AL OUT DX,AL ------------------------------------------ Exit extended function mode | ------------------------------------------ MOV DX,4EH MOV AL,AAH OUT DX,AL PCE-5130 User Manual...
  • Page 102 No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permis- sion of the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd. 2009...

Table of Contents