Memory Installation Procedures; Cache Memory; Processor Installation - Advantech PCE-5124 User Manual

Lga775 intel core 2 quad / core 2 duo processor-based 800/1066/1333 mhz fsb picmg 1.3 single host board with pcie / ddr2 / dual gbe lan

Table of Contents

1.10 Memory Installation Procedures

To install DIMMs, first make sure the two handles of the DIMM socket

are in the "open" position. i.e. the handles lean outward. Slowly slide the

DIMM module along the plastic guides on both ends of the socket. Then

press the DIMM module right down into the socket, until you hear a

click. This is when the two handles have automatically locked the mem-

ory module into the correct position of the DIMM socket. To remove the

memory module, just push both handles outward, and the memory mod-

ule will be ejected by the mechanism in the socket.

Note:

Those CPUs supported by PCE-5124 have 12 MB, 8MB, 6 MB, 4MB,

3MB, 2MB, 1 MB, 512KB L2 cache memory sizes.

Warning!

The PCE-5124 is designed for Intel® LGA 775 socket CPUs.

Because PCE-5124 supports Intel Active Man-

agement Technology 3.0 (iAMT3.0) which uti-

lizes some memory space of channel 0, it's

suggested that the user should not leave chan-

nel 0 DIMM slots (DIMMA1 and DIMMA2)

empty, or it may cause some system abnormal-

ity.

Without a fan or heat sink, the CPU will over-

heat and cause damage to both the CPU and

the single board computer. To install a CPU,

first turn off your system.

Chapter 1

Table of Contents