CYBEX SOLUTION Q-FIX Owner's Manual page 16

INSTALLATION USING LATCH CONNECTORS
The Solution Q-fix is designed to be used with the vehicle's
lower LATCH anchors, if available. This booster seat may be
used in seating positions without lower LATCH anchors, see
page 18.
DO NOT INSTALL this booster seat using LATCH if
the seat belt buckle is located in between the lower
LATCH anchors.
DO NOT INSTALL this booster seat using LATCH if
the seat belt is located between the lower LATCH
anchors.
Step 1
Select a seat location allowed by your vehicle manufacturer
equipped with a THREE POINT LAP AND SHOULDER
BELT system. Locate the lower LATCH anchors or the
symbols indicating their location.
Step 2
If the lower LATCH anchors are hidden behind the crease
between the seat back and seat cushion, install the supplied
LATCH Guides to the lower LATCH anchors for easier
installation of the booster seat.
To install, connect the two LATCH Guides to the two lower
LATCH anchors by sliding the LATCH Guides into the crease
and under the lower LATCH anchor.
14