Accessing Administrative Features; Administration Using The Remote Control; Administration From A Web Browser - LifeSize Passport User Manual

Accessing Administrative Features

You can manage your LifeSize video communications system using the remote control or
remotely using a web browser, telnet session, or secure shell (ssh) session.

Administration Using the Remote Control

To access administrator preferences for configuring the system using the remote control,
follow these steps:
1. From the main screen of the user interface, press the
to access the System Menu.
2. Select Administrator Preferences and press OK.
3. Enter the administrator password and press OK.
Note: The default administrator password is 1 2 3 4. To change the administrator
password, refer to "Changing the Administrator Password" on page 33. If you
enter an incorrect password, press the
the Login Attempt Failed message.

Administration from a Web Browser

To configure your LifeSize system from a web browser, you must have Adobe Flash Player
installed and configured on your web browser. You can download the Flash Player from
www.adobe.com. Refer to the LifeSize Passport Release Notes for the supported Flash
Player version. Release Notes are available from the Support page of www.lifesize.com.
By default, remote access to a LifeSize system through a web browser is enabled. To
disable remote access through a web browser, select Disabled for the HTTP preference in
Administrator Preferences : Security : General.
To access the web administration interface, follow these steps.
1. Open a web browser and enter the IP address of the LifeSize system in the web
address field. The IP address of the system appears at the top of the main screen in the
user interface.
A login screen appears.
Note: This is a secure Internet connection, and you may receive an unknown
certificate warning.
LifeSize Passport User Guide
button on the remote control
button on the remote control to clear
31