Accessing Your Corporate Directory - LifeSize Icon Flex User Manual

Lifesize Icon Flex is DHCP-enabled by default. Connecting an Ethernet cable (see step 6 in
Lifesize Icon Flex as a Voice-only or IP-PBX
it on the Lifesize Phone:
To access the administrator interface:
1. Enter the IP address shown on the Lifesize Phone.
2. Log in using your username and password (by default, both are set to admin).
Your IP address and other network settings are shown in Preferences > Network. You can change these
settings or specify a static IP address to connect with the network if your network does not use DHCP. See
Accessing the Administrator Interface using a Static IP
Accessing the Administrator Interface using a Static IP Address
If your Lifesize Icon Flex is not connected to a network, access the administrator interface using a default
static IP address.
1. Connect your computer to the Lifesize Icon Flex RJ-45 port using an Ethernet cable.
2.
Since DHCP is enabled by default, Lifesize Icon Flex will automatically attempt to acquire an
address. Wait approximately 30 seconds for the acquisition attempt to time out.
3.
From a web browser, enter 169.254.1.1.
4.
Log in to the administrator interface using the default username and password (both admin).
Registering Local SIP for IP-PBX
By default, Lifesize Icon Flex supports the SIP protocol for placing and receiving video and voice calls. To
configure or disable SIP, go to Preferences > SIP Registrar 1.

Accessing your Corporate Directory

You can configure your Lifesize Phone to access an external LDAP directory at Preferences > Directory.
Accessing a directory server allows Lifesize Phone to display user information when initiating a call.
Device) automatically discovers an IP address and displays
Address.
13
Lifesize Icon Flex Guide
Connecting