Table of Contents
Advertisement
LifeSize Multipoint 230 Chassis
L
S
IFE
IZE
M
230
ULTIPOINT
C
HASSIS
L
S
IFE
IZE
M
230
ULTIPOINT
C
M
HASSIS
AIN
F
EATURES
10
<Book title goes here>
LifeSize Multipoint 230 Chassis Main Features
"
Front and Rear Views of the LifeSize Multipoint 230 Chassis
"
The LifeSize Multipoint 230 chassis is a 3U chassis which can hold two LifeSize
LifeSize Multipoint 230 Media Blades and a shelf manager.
The upper LifeSize Multipoint functions as the master blade, providing the single
management interface and controlling both blades in the chassis. The LAN
connection is via the upper blade. The lower LifeSize Multipoint functions as the
slave.
Table 2-1
Chassis Main Features
Field replaceable units (FRUs)
Hot swap
Grounding and electrostatic discharge
Cooling
Power supply
on page 10
All boards, Power Supply Units and fan
drawers are field replaceable units
All FRUs are hot-swappable—removing or
replacing an FRU (except a Power Supply
Unit) does not affect the operation of other
FRUs.
The chassis includes an external
"
GND 4mm stud as per the TUV
requirement).
The chassis includes 4mm
"
banana jacks for a 4.5mm plug or
a standard 0.166" plug, as per the
PICMG 3.0 specification.
The chassis supports a single failed fan in
the fan tray.
Default AC power supply as the
"
default choice.
Universal 90-264 VAC power
"
ports.AC power entry includes
regular IEC320-C14 filtered AC
inlet and double pole switch
located in the rear.
Thermal shutdown if the unit
"
heats up beyond its limits.
on page 11
Advertisement
Table of Contents
