LifeSize Passport User Manual page 10

Controlling LifeSize Cameras
Before placing a video call, become familiar with how to control your LifeSize Camera using
the remote control. To prevent far end users from controlling your near end camera during a
call, contact your administrator. LifeSize Focus does not support camera control.
To adjust LifeSize Camera at the near end when the system is idle, select the camera. Press
the near/far camera button on the remote control.
Use the following buttons on the remote control to adjust the camera angle:
Remote Control Button
Configuring LifeSize Camera Presets
A camera preset is a predefined camera position that is associated with a numeric key on
the remote control. Camera presets enable you to quickly change the position of the near
end PTZ camera during a call by pressing a single key on the remote control instead of
using the arrow and zoom keys. Far end participants see the video image without the delay
that is associated with using more than one key to position the camera.
You can configure and use presets in the Primary Input and Presentation Input screens
before placing a call and from any video screen during a call. To configure and use presets
during a call, you must first select Presets from the Call Manager screen. For more
information about using presets during a call, refer to "Using LifeSize Camera Presets
During a Call" on page 22.
You can save nine presets. When presets are available for use, icons for the numeric keys
(0 through 9) followed by the word Presets appear in the navigation bar.
10
Function
Left and right arrows pan the camera.
Up and down arrows tilt the camera.
Zoom in and zoom out keys make objects appear closer or farther
away.
LifeSize Passport User Guide