New Line At Mpp+1 (Coax Only); Formfeed Active (Coax Only); Autoskip On Formfeed (Coax Only) - Printronix p4280 Setup Gudie

New Line at MPP+1 (Coax only)

This configuration function enables/disables an automatic New Line (NL)
when the carriage return occurs at Maximum Print Position +1 (MPP+1).
MPP is also known as line length.
Values:
On (factory default)
Off

Formfeed Active (Coax only)

Moves the logical print head to the left margin of the first line on the next
page.
Values:
On
Off (factory default)

Autoskip on Formfeed (Coax only)

Performs an automatic skip and creates an automatic NL after a print order
completes when FF is the last character.
NOTE: Autoskip After Printorder must be set to "Off" in order for this
Values:
On
Off (factory default)
3–22
parameter to function properly.
Configuring the Printer