Unpacking; Setting Up Unpacking; Unfolding - Convaid CuddleBug User Manual

CONVAID USER'S GUIDE
Setting Up

Unpacking

Check to see that the following items are included with the chair:
• Left and right footplates.
• Accessories as ordered.
• Hex wrench (5/32").

Unfolding

1. Lay chair down with seat
facing upward. Fig. 1
2. Push in grey detent buttons
on the footplate, and swing
footplate out and upward
until parallel with the ground.
Fig. 2
3. Squeeze the recline lever
on the right side of the
chair's handle and lift seat
back into full upright
position. Fig. 3
SIZE / MODEL
Caution:
Keep fingers
free of folding
mechanism.
1
CHART
CuddleBug
Size Model No.
1 CB-size 1
2 CB-size 2
!
Fig.1
Fig.2
Fig.3