Convaid CuddleBug User Manual page 31

Tilt-in-space wheelchair
Table of Contents

Advertisement

MAINTENANCE CHART
Rims, tires and tire pressure
Wheel locks and hand brakes
Accessories
Front and rear wheel axles
Cleaning & lubricating all moving parts
Belts, zippers and Velcro closures
Seat-/ back upholstery**/tautness
Armrests & foam
Frame
Contacting a Convaid representative
for service or repair***
* Use a non-toxic, hypoallergenic lubricant for all moving parts of the frame
** Follow cleaning instructions for appropriate user hygiene
*** NOTE: Repair or replacement of non-removable, worn or broken parts must be
performed by a qualified service facility.
6. Cleaning and disinfection
Clean all areas that come in contact with user or caregiver with a disinfectant
solution.
To prevent the spread of germs, disinfectant wipes should be used on a regu-
lar basis. Keep frame dry and apply a non-toxic, hypoallergenic and
biodegradable lubricant to all moving parts. After longer storage periods, and
before further use, the entire chair needs to be serviced, cleaned and disin-
fected. Follow the guidelines of each country and region.
Cleaning of frame:
Frame is to be kept dry and free of dirt and should be wiped off with a non-
toxic, hypoallergenic and biodegradable lubricant. Lubricant should be
applied to moving parts as needed to maintain easy folding and adjustment.
All contact with salt water should be avoided. If the chair is used in salt-water
environments corrosion may occur. In the event of salt-water exposure, the
frame should be wiped off with a moist towel as soon as possible. Water and a
soft cloth are sufficient; lubricant should be reapplied to all moving parts.
CONSUMER INFORMATION
Every 3
Weekly
months
Every 6
As necessary
months
28

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CuddleBug and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents