Table of Contents
Advertisement
INSTALLATION
2
INSTALLATION
2.1 Getting Started
TM-7200/TM-6200 High Resolution Digital CCD Camera
The following instructions are provided to help you to set up your video camera system quickly and
easily. It is suggested that you read through these instructions prior to unpacking and setting up your
camera system.
2.1.1 Unpacking Instructions
It is recommended that the original packing cartons for the cameras and lenses be saved in case there is
a need to return or exchange an item.
It is also recommended that any equipment being sent to another location for field installation be bench
tested to assure that everything is fully operational as a system.
2.1.2 Components List
Please begin by checking your order against the Components List (below) to assure that you have
received everything as ordered, and that nothing has been overlooked in the packing materials. If any
item is missing, please contact your PULNiX representative immediately.
•
TM-7200/TM-6200 (EIA) or TM-6200 (CCIR) camera
•
TM-7200/TM-6200 / TM-6200 Data sheet
•
PULNiX Camera Installation and Setup instructions
•
TM-7200/TM-6200 / TM-6200 Operation Manual
2.1.3 Accessories
Following is a list of additional accessories or equipment that may be recommended or required for your
particular application. Please check with your PULNiX representative prior to the installation of your
video system to determine what you might need.
•
Digital Cable: 30DG-02-7200
•
Power Cable: 12P-02
•
Power Supply: PD-12, DC-12N or K25-12V
•
B/W monitor
•
Lens
Page 3
Advertisement
Table of Contents
Need help?
Do you have a question about the TM-7200 and is the answer not in the manual?