Table of Contents
Advertisement
2
INSTALLATION
2.1 Getting Started
Page 4
The following instructions are provided to help you to set up your video camera system quickly and
easily. It is suggested that you read through these instructions prior to unpacking and setting up your
camera system
2.1.1 Unpacking Instructions
It is recommended that the original packing cartons for the cameras and lenses be saved in case there is
a need to return or exchange an item.
It is also recommended that any equipment being sent to another location for field installation be bench
tested to assure that everything is fully operational as a system.
2.1.2 Components List
Please begin by checking your order against the Components List (below) to assure that you have
received everything as ordered, and that nothing has been overlooked in the packing materials. If any
item is missing, please contact your PULNiX representative immediately.
•
TM-200 camera
•
TM-200 data sheet
•
TM-200 operations manual
2.1.3 Accessories
Following is a list of additional accessories or equipment that may be recommended or required for your
particular application. Please check with your PULNiX representative prior to the installation of your
video system to determine what you might need.
•
Power Cable: 12P-02 Interface Cable
•
Power Supply: PD-12P, PD-12P, DC-12N, or K25-12V
INSTALLATION
TM-200 / TM-300 Miniature CCD Camera
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the TM-200 and is the answer not in the manual?