Monitor Display Control - Panasonic System 850 Operating Instructions Manual

Monitor Display Control

On-Screen Display Control
The procedure described below lets you determine the dis-
play, such as camera title, clock and status, on and off on
the active monitor screen.
Note: The following functions are not available when the
on-screen displays
Character Board that is installed on the Camera Input
Board. Confirm the setting in the Administration
Console for details.
1. Select the desired monitor.
Refer to the Monitor Selection.
2. Pressing the [1] button while holding down the [OSD]
button will toggle the clock (time and date) display on
the active monitor on and off.
07/07/1999
M AREA1
C CAMERA
GROUP PRESET
PREV
OPE ID S-CTL ID
LOG OUT
PAUSE
CAM MENU OFF
GROUP
F1 SEQ
F2
OSD
CAM FUNC
112
are compounded
03:37:21 PM
ALM T R A
TITLE
T&D CAM ID GEN
NEXT
AUX1 OFF AUX1 ON WIPER
ALM S VLD S SYS S
STOP MON STATUS ALL
CAM MENU ON AUX2 OFF AUX2 ON
TOUR ALM H VDL H
SEQ
DEF OFF DEF ON
CLEAR
( ESC )
MONITOR
SHIFT BLK EXIT
LOCK
OSD SERVICE
3. Pressing the [2] button while holding down the
[OSD] button will toggle the camera title display on
the active monitor on and off.
07/07/1999
from the
M
C
GROUP PRESET
OPE ID
LOG OUT
F1
F2
CAM FUNC
4. Pressing the [3] button while holding down the [OSD]
button will toggle the general status display on the
active monitor on and off.
07/07/1999
M
C
GROUP PRESET
OPE ID
LOG OUT
F1
F2
CAM FUNC
03:37:21 PM
AREA1 ALM T R
CAMERA TITLE
PREV NEXT T&D CAM ID
AUX1 OFF AUX1 ON
S-CTL ID
ALM S VLD S
PAUSE STOP MON STATUS
CAM MENU OFF CAM MENU ON AUX2 OFF AUX2 ON
GROUP TOUR ALM H VDL H
SEQ SEQ
DEF OFF DEF ON
OSD MONITOR
SHIFT BLK
LOCK
OSD SERVICE
03:37:21 PM
AREA1 ALM T R
CAMERA TITLE
PREV NEXT T&D CAM ID
AUX1 OFF AUX1 ON
S-CTL ID
ALM S VLD S
PAUSE STOP MON STATUS
CAM MENU OFF CAM MENU ON AUX2 OFF AUX2 ON
GROUP TOUR ALM H VDL H
SEQ SEQ
DEF OFF DEF ON
OSD MONITOR
SHIFT BLK
LOCK
OSD SERVICE
A
GEN
WIPER
SYS S
ALL
CLEAR
( ESC )
EXIT
A
GEN
WIPER
SYS S
ALL
CLEAR
( ESC )
EXIT