Panasonic System 850 Operating Instructions Manual page 16

2. Confirm that switches (SW1) on the board are set to the
OFF position as shown below.
DIP
Character display
1
without camera input
2 No retry mode
3 Reserved
4 Reserved (P)
3. Position jumper connectors (CN101, CN201, CN301,
CN401, CN501, CN601, CN701, and CN801) on the
board as shown below.
The factory default setting is positions 3 and 4
(Multiplexed Camera).
2 4
1 3
Multiplexed Camera
Default Setting
4. If the Character Board is installed on the Camera Input
Board, position jumper connectors (CN103, CN203,
CN303, CN403, CN503, CN603, CN703, and CN803)
on the board as shown below.
The factory default setting is positions 1 and 2.
3
CN103
Default Setting
17
SW1
ON OFF
No display
without camera input
3 retries mode
Reserved
Reserved (N)
2 4
1 3
Others
1
3 1
CN103
Installed
Character Board