Priority Lock - Panasonic System 850 Operating Instructions Manual

Priority Lock

This function is used to retain control of a monitor for an
operator, even after that operator has selected another
monitor.
Caution: This function will prevent operators with a lower
priority from gaining control of a monitor.
However, higher or equal priority operators may still
gain control of that monitor.
Applying Priority Lock
1. Select the desired monitor to apply Priority Lock.
Refer to the Monitor Selection.
2. Pressing the [MONITOR] key while holding down the
[SHIFT] key will toggle the Priority Lock mode on and
off on the active monitor.
If the Priority Lock mode is selected, the monitor num-
ber with "L" sign is displayed on the active monitor and
the MONITOR LOCK indicator on the controller is on.
GROUP
PRESET
OPE ID
GROUP
SEQ
TOUR
SEQ
OSD
Releasing Priority Lock
1. Select the desired monitor to release Priority Lock.
Refer to the Monitor Selection.
2. Pressing the [MONITOR] key while holding down the
[SHIFT] key will release the lock mode.
The monitor number is displayed normally on the active
monitor and the MONITOR LOCK indicator on the con-
troller is now off.
80
INFORMATION
Mon Lock
PREV NEXT
1 2 3
T&D CAM ID GEN
S-CTL ID VER ALM S VLD S SYS S
PAUSE STOP
4 5 6
( ALARM )
MSTATUS ALL
ALM H VLD H
R E V F W D 7 8 9
RU N RU N
0
MONITOR CLEAR
LOCK (ESC)
OSD SERVICE
SHIFT BLK EXIT
INFORMATION
Mon Unlock