Table of Contents
Advertisement
Alarm Control
When cameras and monitor are armed for alarm response
with an alarm input, the camera pictures associated with
that alarm input is displayed on the monitor when the alarm
is received.
When an alarm is received, the ALARM indicator lights. The
indicator remains lit until all alarms are cleared by pressing
the RESET key.
Alarm Arming Control
1. Select an alarm number by pressing the numeric keys,
followed by the [ALARM] key.
2. Pressing the [ARM] key repeatedly will arm or disarm
cameras and monitor for alarm response with the
selected alarm.
"Armed" or "Disarmed" will be displayed on the LCD
display.
INFORMATION
Entry:43
ALARM
GROUP
PRESET
OPE ID
GROUP
SEQ
TOUR
SEQ
OSD
3. Pressing the [NEXT] key while holding down the
[ALARM] key will select the next higher alarm number,
or pressing the [PREV] key while holding down the
[ALARM] key will select the next lower alarm number.
4. Pressing the [ARM] key repeatedly will arm or disarm
cameras and monitor for alarm response with the
selected alarm.
5. To exit from alarm selecting mode, press the [CLEAR
(ESC)] key.
95
INFORMATION
Alarm 43
Armed
F.1
F.2
ACK
RESET
ARM
ALL
RESET
PREV
NEXT
1
2
3
T&D
CAM ID
GEN
S-CTL ID
VER
ALM S
VLD S
SYS S
PAUSE
STOP
( ALARM )
4
5
6
MSTATUS
ALL
ALM H
VLD H
R E V
F W D
7
8
9
RU N
RU N
0
MONITOR
CLEAR
LOCK
(ESC)
OSD SERVICE
EXIT
SHIFT
BLK
To Cancel Alarms
1. Select an activated alarm number that is displayed on
the active monitor by pressing the numeric keys, fol-
lowed by the [ALARM] key.
2. Select the alarm action number by pressing the numer-
ic key, then press the [ACK] key to acknowledge the
activated alarm manually.
The acknowledged alarm picture is displayed on the
active monitor, and the ACK indicator on the controller
is turned on.
Note: By the factory default setting, pressing only the
[ACK] key will interpret it as the alarm action #0.
3. After acknowledging the alarm, press the [RESET] key
to reset the alarm.
The ACK indicator will go off.
INFORMATION
Alarm 43
ALARM
ACK
RESET
ALL
RESET
GROUP
PREV
NEXT
PRESET
OPE ID
S-CTL ID
VER
GROUP
PAUSE
STOP
SEQ
TOUR
R E V
F W D
SEQ
RU N
RU N
MONITOR
OSD
LOCK
OSD SERVICE
Note: All reset function is available without selecting
the activated alarms. Pressing the [RESET] key
while holding down the [SHIFT] key will cancel all
currently activated alarms at once.
INFORMATION
Alarm 43
Acknowledged
F.1
F.2
ARM
1
2
3
T&D
CAM ID
GEN
ALM S
VLD S
SYS S
4
5
6
( ALARM )
MSTATUS
ALL
VLD H
ALM H
7
8
9
0
CLEAR
(ESC)
SHIFT
BLK
EXIT
Advertisement
Table of Contents
