Monitor And Camera Selection - Panasonic System 850 Operating Instructions Manual

Monitor and Camera Selection

After log-in, the following operations are available for con-
trolling the system.
The operation begins with selecting a monitor; then select a
camera to be displayed on the active monitor screen.
Monitor Selection
1. Select the desired monitor number by pressing the
numeric buttons, then press the [MONITOR] button to
execute the selection.
The MONITOR indicator on the controller is turned on
and the selected monitor number is now displayed on
the LED display of the controller.
PREV
S-CTL ID
PAUSE
CAM MENU OFF CAM MENU ON
GROUP
SEQ
OSD
If the selected monitor number is not valid or parti-
tioned, the PROHIBITED indicator is on and the number
on the LED display will blink for about 3 seconds.
Return to step 1 and select a new monitor number.
2. Pressing the [NEXT] button while holding down the
[MONITOR] button will select the next higher monitor
number, or pressing the [PREV] button while holding
down the [MONITOR] button will select the next lower
monitor number.
PREV
S-CTL ID
PAUSE
CAM MENU OFF CAM MENU ON
GROUP
SEQ
OSD
OSD SERVICE
Note: The BUSY indicator lights, if the monitor is select-
ed by a higher priority operator. Control of the
same monitor is denied to an operator with a lower
priority.
102
T&D CAM ID GEN
NEXT
AUX1 OFF AUX1 ON WIPER
ALM S VLD S SYS S
STOP MON STATUS ALL
AUX2 OFF AUX2 ON
TOUR ALM H VDL H
SEQ
DEF OFF DEF ON
CLEAR
( ESC )
MONITOR
SHIFT BLK EXIT
LOCK
OSD SERVICE
NEXT
T&D CAM ID GEN
AUX1 OFF AUX1 ON WIPER
ALM S VLD S SYS S
STOP MON STATUS
ALL
AUX2 OFF AUX2 ON
TOUR
ALM H VDL H
SEQ
DEF OFF DEF ON
CLEAR
MONITOR ( ESC )
LOCK SHIFT BLK EXIT
Camera Selection
1. Select the desired monitor.
Refer to the Monitor Selection.
2. Select the desired camera number by pressing the
numeric buttons, then press the [CAMERA (ENTER)]
button.
The selected camera picture appears on the currently
selected monitor and the selected camera number is
now displayed on the LED display of the controller.
T&D CAM ID
AUX1 OFF AUX1 ON
ALM S VLD S
MON STATUS
AUX2 OFF AUX2 ON
ALM H VDL H
DEF OFF DEF ON
SHIFT BLK
If the selected camera number is not valid or parti-
tioned, the PROHIBITED indicator is on and the number
on the LED display will blink for about 3 seconds.
Return to step 2 and select a new camera number.
3. Pressing the [NEXT] button while holding down the
[CAMERA (ENTER)] button will replace the currently
selected camera with the next higher camera number,
or pressing the [PREV] button while holding down the
[CAMERA (ENTER)] button will replace the currently
selected camera with the next lower camera number.
PREV NEXT
S-CTL ID AUX1 OFF
PAUSE STOP
CAM MENU OFF CAM MENU ON
AUX2 OFF
GROUP TOUR
SEQ SEQ
DEF OFF
OSD MONITOR
LOCK
OSD SERVICE
Note: The BUSY indicator lights, if the camera is
selected by a higher priority operator. Control of
the same camera is denied to an operator with a
lower priority.
PROGRAM
PRESET
GEN
WIPER
SYS S
ALL
CALL
PRESET
CLEAR
CAMERA
( ESC )
( ENTER )
EXIT
AUTO
PAN
PROGRAM
PRESET
T&D CAM ID GEN
AUX1 ON WIPER
ALM S VLD S SYS S
MON STATUS
ALL
CALL
PRESET
AUX2 ON
ALM H VDL H
DEF ON
CLEAR
CAMERA
( ESC )
( ENTER )
SHIFT BLK EXIT
AUTO
PAN