Table of Contents
Advertisement
WJ-SX850 Matrix Switcher Card Cage
Mounting into the Rack
1. Remove the four rubber feet by removing four screws
from the bottom of the Matrix Switcher.
2. Install the Matrix Switcher in the rack securing it with
eight screws (not included).
Rack Mounting Screws
Cautions:
• The cooling fans inside the card cage are subject
to wear and need to be replaced periodically.
• Do not block the ventilation opening or slots on the
cover to prevent the temperature from rising inside
the unit.
Always keep the temperature in the rack within
45˚C (113˚F).
• If the rack is subject to vibration, secure the rear of
the unit to the rack using additional mounting
brackets (procured locally).
61
WJ-MPU850 Central Processing Unit
WJ-MPU855 Central Processing Unit
Mounting into the Rack
1. Remove the four rubber feet by removing four screws
from the bottom of the CPU.
2. Install the CPU in the rack securing it with four screws
(not included).
Rack Mounting Screws
Cautions:
• The cooling fans inside the CPU are subject to
wear and need to be replaced periodically.
• Do not block the ventilation opening or slots on the
cover to prevent the temperature from rising inside
the unit.
Always keep the temperature in the rack within
45˚C (113˚F).
• If the rack is subject to vibration, secure the rear of
the unit to the rack using additional mounting
brackets (procured locally).
C on tr
ol P ro
ce ss in
g U ni
t W J-
8 5 0
M P U
Advertisement
Table of Contents
