Log-In And Log-Out - Panasonic System 850 Operating Instructions Manual

Log-in and Log-out

Before starting the following procedures, all system compo-
nents must be turned on.
The following procedures apply when the WV-CU350
System Controller is connected to the system.
Log-in
1. Turn on the power switches of all system components.
2. Turn on the power of the WV-CU350 System Controller
by connecting the AC adapter to the AC outlet.
The LINK indicator lights up and "NO USER" will
appear on the LED display of the system controller.
3. Select your registered operator ID number (up to 5 dig-
its) by pressing the numeric buttons, then press the
[CAMERA (ENTER)] button.
The underline display now appears on the LED display
of the controller.
100
PROGRAM
PRESET
T&D CAM ID GEN
AUX1 OFF AUX1 ON WIPER
ALM S VLD S SYS S
MON STATUS
ALL
CALL
PRESET
AUX2 OFF AUX2 ON
ALM H VDL H
DEF OFF DEF ON
CLEAR
CAMERA
( ESC )
( ENTER )
SHIFT BLK EXIT
AUTO
PAN
4. Select your registered Password (up to 5 digits) by
pressing the numeric buttons, then press the [CAM-
ERA (ENTER)] button.
T&D CAM ID
AUX1 OFF AUX1 ON
ALM S VLD S
MON STATUS
AUX2 OFF AUX2 ON
ALM H VDL H
DEF OFF DEF ON
SHIFT BLK
If operator ID and password are correct, "READY" will
appear on the LED display.
Note: If an operator ID and password error have
occurred, the PROHIBITED indicator on the con-
troller will light up and "NO ACCESS" will blink on
the LED display for about 3 seconds. Then the
Log-in procedure automatically returns to the start.
PROGRAM
PRESET
GEN
WIPER
SYS S
ALL
CALL
PRESET
CLEAR
CAMERA
( ESC )
( ENTER )
EXIT
AUTO
PAN