Table of Contents
Advertisement
USRID: User ID
Note: Alarm USRID consists of Alarm Number and
Alarm Action Number.
E.g. "ALM20" indicates alarm #2 and its action #0.
PRTY: User Priority
3. Press the [NEXT] key to select the next page of the sta-
tus, and press the [PREV] key to back up to the previ-
ous page.
4. Press the [NEXT] key while holding down the [SHIFT]
key to select the first page of the status, and press the
[PREV] key while holding down the [SHIFT] key to
select the last page.
5. Pressing the [0] key while holding down the [MONI-
TOR] key will toggle the background camera images
and black on the active monitor.
6. To exit as it stands, select a new monitor.
7. To exit from the mode, press the [CLEAR (ESC)] key
while holding down the [MONITOR] key or select a
camera to be displayed on the active monitor.
Alarm History Table
There are 100 alarm records stored in chronological order
in 10 pages of table.
1. Select a monitor for displaying the history.
Refer to the Monitor Selection.
2. Pressing the [4] key while holding down the [MONI-
TOR] key will display the ALARM HISTORY table as
shown in the figure on the active monitor.
ALARM
ALM
STATE
2
ARMED
2
ACKED
2
ACTIVE
1
ARMED
1
ACTIVE
1
ARMED
1
RESET
1
ACKED
1
ACTIVE
1
ARMED
GROUP
PRESET
OPE ID
GROUP
SEQ
TOUR
SEQ
OSD
93
HISTORY
PG 1
DATE-TIME
03/21/00 10:17
03/21/00 10:16
03/21/00 10:15
03/21/00 10:14
03/21/00 10:14
03/21/00 10:12
03/21/00 10:12
03/21/00 10:11
03/21/00 10:10
03/21/00
9:50
PREV
NEXT
1
2
3
T&D
CAM ID
GEN
S-CTL ID
VER
ALM S
VLD S
SYS S
PAUSE
STOP
4
5
6
( ALARM )
MSTATUS
ALL
VLD H
ALM H
R E V
F W D
7
8
9
RU N
RU N
0
CLEAR
MONITOR
LOCK
(ESC)
OSD SERVICE
SHIFT
BLK
EXIT
The columns in the table indicate the states as shown
below.
ALM: Logical Alarm Number
STATE: Indicates alarm state changes.
ARMED: The system is armed for alarm response.
ACTIVE: Alarm has been triggered and activated
assigned alarm response.
ACKED: Alarm is acknowledged and an operator
can control the alarm action.
RESET: Activated alarm is reset, but the alarm
device is still active.
DISARMED: The system is disarmed for alarm
response.
DATE-TIME: Date and time when alarm state changes.
3. Press the [NEXT] key to select the next page of the his-
tory, and press the [PREV] key to back up to the previ-
ous page.
4. Press the [NEXT] key while holding down the [SHIFT]
key to select the first page of the history, and press the
[PREV] key while holding down the [SHIFT] key to
select the last page.
5. Pressing the [0] key while holding down the [MONI-
TOR] key will toggle the background camera images
and black on the active monitor.
6. To exit as it stands, select a new monitor.
7. To exit from the mode, press the [CLEAR (ESC)] key
while holding down the [MONITOR] key or select a
camera to be displayed on the active monitor.
Advertisement
Table of Contents
