Resetting Channel Setting - Panasonic SC-RT30 Operating Instructions Manual

Resetting channel setting

Refer to the control reference on page 35.
You can add or delete channels, or change programme positions.
1
While stopped
Press [FUNCTIONS].
2
Press [3, 4] to select "To Others"
and press [ENTER].
3
Press [3, 4] to select "Setup" and
press [ENTER].
4
Press [3, 4] to select "Tuning" and
press [1].
Setup
Manual
Auto-Setup Restart
Download from TV
Tuning
Disc
Picture
Sound
Display
SELECT
TAB
Connection
RETURN
Others
ENTER
5
Press [3, 4] to select "Manual" and
press [ENTER].
Manual Tuning
Pos Name Ch Pos Name
1 ARD 4 11
2 ZDF 2 12
3 N3 5 13
4 HR3 8 14
5 BR3 10 15
6 16
7 17
SELECT
8 18
ENTER
9 19
RETURN
10 20
Delete Move
Add
A B C
≥If the Country setting menu appears on the television
Country
SELECT
ENTER
RETURN
RETURN: leave ENTER: access
Press [3, 4] to select the country and press [ENTER].
To delete a programme position
Press [3, 4, 2, 1] to select a programme position and
press [A].
To add a blank programme position
Press [3, 4, 2, 1] to select a programme position and
press [B].
To move a TV station to another programme position
1Press [3, 4, 2, 1] to select a programme position and
press [C].
2Press [3, 4, 2, 1] to select the new programme position
to which you want to assign the TV station and press
[ENTER].
[Note]
When the unit connected to a Q Link-compatible TV with a fully
wired 21-pin Scart cable sets itself automatically (Setup Guide ➡ 3,
4), only deletion of the programme position can be performed.
Ch
To change detailed station settings
After performing steps 1–5
6
Press [3, 4, 2, 1] to select a
programme position and press
[ENTER].
e.g.,
Pos 1
Manual
Name ARD
Tuning
Channel 4
Fine Tuning Auto
Video System
Auto
Audio Mode
BG
SELECT
Mono Off
Title Page
301
RETURN
RETURN : leave
Press [3, 4] to select an item and press [1].
Pos To change the programme position in which
the TV stations are assigned
Press [3, 4] or numbered buttons to select the
number of the desired programme position and
press [ENTER].
Name To enter or change the name of a TV station
Press [3, 4, 2, 1] to enter station name and
press [ENTER].
If the station name needs a blank space, select
the blank between "Z" and "¢".
Channel To enter newly available TV stations or change
the channel number of an already tuned TV
station
Press [3, 4] or the numbered buttons to enter
the channel number of the desired TV station.
Wait a few moments until the desired TV station
has been tuned.
After the desired TV station is tuned, press
[ENTER].
Fine Tuning To obtain the best tuning condition
Press [3, 4] to adjust the best tuning condition
and press [ENTER].
≥Press [1] to return to "Auto".
Video To select the video system type
Press [3, 4] to select "PAL" or "SECAM" if the
System
picture lacks colour, and press [ENTER].
Auto: This unit automatically distinguishes PAL
and SECAM signals.
PAL: For receiving PAL signals.
SECAM: For receiving SECAM signals.
Audio Mode To select the audio reception type
If sound quality is poor, press [3, 4] to select
"BG", "DK" or "I" and press [ENTER].
BG: PAL BGH/SECAM BG
DK: PAL-DK/SECAM-DKK1
I: PAL-I
Mono To select the type of sound to be recorded
Press [3, 4] to select "On" if the stereo sound is
distorted due to inferior reception conditions, or if
you want to record the normal (mono) sound
during a stereo, bilingual or NICAM broadcast,
and press [ENTER].
Title Page To enter the Teletext title page for a channel
Entering title page number allows the unit to
automatically record programme and station
names.
Press [3, 4] or numbered buttons to enter the
number and press [ENTER].
≥To find the correct title page for the station, refer
to its Teletext TV guide.
≥The unit's clock must be set correctly.
You can make the following two settings by selecting the external
input channel (AV1, AV2, AV3) in step 6.
≥Video System (Auto/PAL/SECAM)
In order to record properly, make the appropriate settings to match
the connected equipment.
≥Title Page (Auto/Off)
RQT8728
39