Assigning A Station Number (Not For U.s.); Associated Dialing/Dialing Aid - Siemens HiPath 2000 Operating Manual

Step by Step
Program/Service
r
*
41=Temporary MSN?
*41

Assigning a Station Number (Not for U.S.)

If this function has been configured (contact your ser-
vice personnel), you can assign a specific number (DID
number) to your telephone before making an external
call. The assigned number then appears on the called
party's display.
FCN
Press the display key.
OK
Confirm.
OK
Select and confirm.
or
Enter the code.
~
Enter the DID number you wish to use.
~
Dial the external number.

Associated Dialing/Dialing Aid

If this function has been configured (contact your ser-
vice personnel), you can use a dialing aid to dial num-
bers and set up calls for your telephone.
The operating procedure depends on whether the dial-
ing aid is connected to the S
You can also use your system telephone as a dialing aid
for other telephones.
Dialing aid on the S
On the PC, select a destination and start dialing.
d
The speaker on your telephone is switched on. Press
the speakerphone key when the other party answers.
Dialing aid at the a/b (T/R) port:
On the PC, select a destination and start dialing.
"Lift the handset" appears on the PC screen.
c
Press the talk key.
Making Calls – Enhanced Functions
bus or the a/b (T/R) port.
0
bus:
0
57