Assigning A Station Number (Not For U.s.); Trunk Flash; Associated Dialing/Dialing Aid - Siemens HiPath 3000 Operating Instructions Manual

Making Calls
Step by Step
Consultation
20
Assigning a Station Number
(Not for U.S.)
If this function has been configured (contact the service
personnel), you can selectively assign a specific num-
ber (DID number) to your telephone before making an
external call. The assigned number then appears on the
called party's display.
C
Lift the handset.
F=:
Enter the code.
D
Enter the DID number you wish to use.
D
Dial the external number.

Trunk Flash

To activate ISDN-type services and features through the
network carrier's analog trunks or those of other com-
munications platforms (such as "consultation hold"), you
must send a signal to the trunks before dialing the ser-
vice code or telephone number.
Precondition: You have set up an external connection
via an analog line.
Press the key. LED flashes. Enter the code.
F>:
D
Enter the service code and/or telephone number.

Associated Dialing/Dialing Aid

If this function has been configured (contact the service
personnel), you can use your telephone as a dialing aid
for other telephones.
C
Lift the handset.
F?@
Enter the code.
D L
Enter the internal station number of the party for whom
you want to dial.
D
Enter the number you wish to dial (external number
with external code).