Rejecting Calls; Using The Speakerphone - Siemens HiPath 2000 Operating Manual

Making Calls – Enhanced Functions
Step by Step
c
Mute off?
r
HF answerback on?
r
HF answerback off?
*OL
#OL
42

Rejecting Calls

You can reject calls which you do not wish to take. The
call is then signaled at another definable telephone
(contact your service personnel).
The telephone rings. The caller is displayed.
a
Press the on-hook key.
If call rejection is not permitted, your telephone will con-
tinue to ring. The message "Currently not possible" is
displayed (for example, in the case of recalls).

Using the Speakerphone

A colleague addresses you directly over the speaker.
You hear a tone before the announcement. The other
party's name or station number appears on the screen.
You can reply to the call in handsfree answerback mode.
d
or Press the talk key or the speakerphone key and reply.
or
OK
Press the key to confirm your selection and answer the
call.
If handsfree answerback is enabled (see below),
you do not need to switch on the microphone -
you can answer directly. You can answer immedi-
ately in speakerphone mode.
If handsfree answerback is disabled (default set-
ting), follow the procedure described above.
Placing a speaker call to a colleague
Enabling and disabling handsfree answerback
OK
Select and confirm.
or
OK
or
Code for "HF answerback on"
or
Enter the code for "HF answerback off".
Page 55.