Using Team Functions; Turning Group Call On And Off - Siemens HiPath 2000 Operating Manual

Using Team Functions

Step by Step
Using Team Functions

Turning Group Call On and Off

If this function has been configured (contact your ser-
vice personnel), you belong to one or more groups of
users who can each be reached under a hunt group or
group station number.
Incoming calls are signaled at all group member tele-
phones in the order in which they are received (= hunt
group) or simultaneously (= group call) until one mem-
ber of the group accepts the call.
Each member of the group remains available at his or
her own station number.
You can activate and deactivate the audible signal for a
hunt group, group call or individual trunks in a group.
If an FCN entry is programmed for "Join/leave group"
Page 70, the red LED icon indicates that the audible
tone was activated for at least one group.
103