Fcn Function; Preprogrammed Fcn Entries; Saving Fcn Entries - Siemens HiPath 2000 Operating Manual

Basic Operating Instructions
Step by Step
Program/Service
REDIAL
Mailbox
Microphone
Loudspeaker
22

FCN Function

An entry in the FCN list is comparable with a function
key on an optiPoint phone. In other words, you can save
specific functions from the System menu to the FCN
list and activate them as required. The function key LED
on the optiPoint phone is replaced in
optiPoint WL 2 professional by an animated icon
Page 21.
You can replace the default labels for repdial and DSS
entries with your own texts.

Preprogrammed FCN Entries

Slots 1 - 5 in the FCN list are preprogrammed with the
following functions:
Program/Service (permanent entry).
Saved number redial from the system (permanent en-
try).
Mailbox (editable entry).
Microphone (editable entry).
Speaker (permanent entry).
In the case of "Mailbox" and "Microphone" entries as
well as repdial and DSS entries, you can change the de-
fault label and replace it with an individual text.

Saving FCN Entries

You can program slots 3, 4 and 6 to 12 with functions or
station numbers:
• For information on saving a station number as an
FCN entry Page 37
• For information on saving a function as an FCN entry
Page 70