Privacy/Security; Turning Ringer Cutoff On And Off; Activating/Deactivating Do Not Disturb - Siemens HiPath 2000 Operating Manual

Step by Step
r
Ringer cutoff on?
r
Ringer cutoff off?
*ON
#ON
r
DND on?
r
DND off?
*OM
#OM

Privacy/Security

Turning Ringer Cutoff On and Off

You can activate the ringer cutoff function if you do not
want the receive any calls. Calls are only identified by
one ring signal, an indication on the display, and by a
flashing icon associated with a programmed FCN entry.
OK
Select and confirm
or
OK
or
Enter the code for "Ringer cutoff on".
or
Enter the code for "Ringer cutoff off".

Activating/Deactivating Do Not Disturb

You can activate the do not disturb function if you do not
want the receive any calls. When do not disturb is acti-
vated, internal callers hear a busy signal and external
callers are rerouted to a telephone assigned for this pur-
pose (contact your service personnel).
OK
Select and confirm.
or
OK
or
Enter the code for "DND on".
or
Enter the code for "DND off".
When you press the talk key, a special dial tone
(continuous whirring tone) reminds you that DND
is on.
Authorized internal callers can automatically
override the do not disturb function after five sec-
onds.
[1] "Different Displays (HiPath 4000 Environment)"
[1]
.
Privacy/Security
Page 135
83