Getting Started; Inserting The Battery - Siemens HiPath 2000 Operating Manual

Getting Started

Inserting the Battery

Only use rechargeable batteries recommended by Siemens
Page 140. Never use conventional (non-rechargeable) batteries or
other battery types as this can cause serious damage to your health
and property. For instance, it could damage the battery cladding or
cause the battery to explode. It could also damage your handset and
interfere with how your it works.
1. Hold your handset face down in the palm of your hand.
2. With the other hand, place your thumb on the loudspeaker on the back
of the device (a) and use your index finger to grip the recess provided
at the top of the handset (b).
3. Lift the cover.
4. Insert the battery correctly and lock it in place.
5. Hold the battery cover at a slight angle and insert the two projections
provided on the lower side into the battery compartment. Then close
the cover until it snaps shut.
Basic Operating Instructions
a
b
13