Connection Wizard; Automatic Start; Manual Start - Siemens HiPath 2000 Operating Manual

Step by Step
Profile 2
Profile 3
Use exist. Profile
q
Profile 2
Profile 3
s
Connect. Wizard
Use exist. Profile
q
Profile 2
Profile 3

Connection Wizard

You can define multiple WLAN access points to guaran-
tee the reception quality within your telephone system.
You can program appropriate connection profiles (up to
16 profiles
These are accessed and activated via the connection
wizard.
Intensity of reception of the network profiles
Active profiles are shown in the list of profiles in green
4
0
colour and are tabulated by their intensity of reception
(0 - 4 / the highest intensity is listed on top of the list).
Inactive profiles are shown in black colour.

Automatic Start

If your optiPoint WL 2 professional is out of the WLAN
access point's range, you receive an error message
( Page 138) and can log on again over the connection
wizard.
Re-Scan
Press the display key.
OK
Confirm.
The list of configured stations appears.
OK
Select the profile with the highest reception strength
4
0
first (4) and confirm.

Manual Start

If you deliberately exit the range of your current WLAN
access point (for example, enter another company
building), you can manually select the connection pro-
file.
Precondition: An appropriate profile is configured
Page 122.
t
Open the main menu.
5
Enter the code.
or
OK
Select and confirm.
OK
Confirm.
The list of configured stations appears.
OK
Select the profile with the highest reception strength
4
0
first (4) and confirm.
Programming the Handset
Page 122).
129