Nexcom PEAK 715-HT Series User Manual page 43

USB Controller
Select Enabled if your system contains a Universal Serial Bus controller and you
have USB peripherals.
USB 2.0 Connector
Select Enable if your system contains a Universal Serial Bus 2.0 controller and you
have USB peripherals.
USB Keyboard Support
Select Enabled if your USB controller is enabled and it needs USB keyboard sup-
port in legacy (old) OS operating systems such as DOS.
AC97 Audio
Selecting Auto will enable the AC97 audio if it is detected onboard.
AC97 Modem
Selecting Auto will enable the AC97 modem, if it is detected onboard.
Init Display First
This item allows you to active PCI slot or onboard display first. The choices are:
PCI slot, Onboard/AGP.
IDE HDD Block Mode
Block Mode transfers can improve the access to IDE devices. Enable this item if
your IDE devices support block mode transfers.
Power ON Function
Select the different manners for powering on the system. The choices: Keyboard
98, Password, Any KEY, Hot KEY, BUTTON ONLY, Mouse Click, Mouse Move.
KB Power ON Password
The system will ask for a password. After entering the correct password, the key-
board starts running.
Hot Key Power ON
The choices are: Ctrl+F1,Ctrl+F2,......Ctrl+F12.
42