Power Management Setup; Figure 4-7 : Bios- Power Management Setup - Nexcom PEAK 715-HT Series User Manual

4.8 Power Management Setup

Figure 4-7 : BIOS- Power Management Setup

Power Supply Type
The choices: AT, ATX.
Soft-Off by PWRBTN (Power Button)
Pressing the power button for more than 4 seconds forces the system to enter the
Soft-Off state when the system "hangs". The available choices are Delay 4
Seconds, Instant-Off
PWRON After PWR-Fail
This setting specifies whether your system reboots after a power failure.
There are three selections:
Off: The system will remain off when power comes back after a power failure.
On: The system will switch on when power comes back after a power failure.
Former-Sts: The system will return to the last state before the power failure when
power returns.
ACPI Function
This item allows you to Enable/Disable the Advanced Configuration and Power
Interface (ACPI). The Choice: Enabled, Disabled.
44