Nexcom PEAK 715-HT Series User Manual page 36

CPU L1 & L2 Cache
The choices are: Enabled, Disabled.
Pentium 4 M CPU Speed
This item allows user to choose the CPU speed to Low or High. The default is
High.
Hyper Threading Technology
The Intel Hyper-Threading Technology allows a single processor to execute two or
more separate threads concurrently. When hyper-threading is enabled, multi-
threaded software applications can execute their threads in parallel, thereby im-
proving the processor's performance.
Quick Power On Self Test
This item speeds up the Power On Self Test (POST) when you turn on the
computer. If it is set to Enabled, BIOS will shorten or skip some check items dur-
ing the POST.
First/Second/Third Boot Device
BIOS attempts to load the operating system from the devices in the sequence
selected in these items. The available choices are Floppy, LS120, HDD-0, SCSI,
CDROM, HDD-1, HDD-2, HDD-3, ZIP100, USB-FDD, USB-ZIP, USB-CDROM,
USB-HDD, LAN, Disabled.
Boot Other Device
If the selected boot devices fail to boot, selecting Enabled for this item allows the
BIOS to boot from other boot devices (in a predefined sequence) which are
present but not selected as boot devices in the setup.
Swap Floppy drive
If the system has two floppy drives, use this item to swap the logical drive name
assignments.
Boot Up Floppy Seek
Enable this to allow the system to search for floppy drives during the POST. Dis-
able this item to boot faster.
Boot Up NumLock Status
Selects the power on state for NumLock. The available choices are Off and On.
35