Table of Contents
Advertisement
• Relay: Pins 7 and 8 can be opened or closed through an internal relay.
• CS1-3: Will be programmed as a Channel/Link Select. Pins programmed as a Channel Select will be used as binary
inputs to select the desired RF Link programmed in the Link Configuration window. Pins are internally pulled high.
• I/O Port Voltage: Programs the input and output voltage of the pins on the Guardian User Port. Valid voltage range
is from 3.3 - 5.0V. Default is 3.3V.
5.8
USER CONFIGURATION — LOADER MODE
The User Configuration window is accessed from the Utilities menu or the Config button on the tool bar.
To put the Guardian in Loader mode, select Loader in the Mode field.
Figure 23 User Configuration Window – Loader Mode
Comment
The Comment field can be used as a notepad (i.e., customer name, location, technical info, etc. can be entered in this
field). Comments are text up to 80 characters including spaces.
Mode
Selects whether the Guardian will operate as a Digital Modem or an Analog Loader.
Guardian™ Serial Modem or Analog Radio for Licensed Spectrum PN 001-5006-000 Rev. 3
| Page 35
Advertisement
Table of Contents
