Table of Contents
Advertisement
Figure 25 Link Configuration Window Default Tab – Loader Mode
Default Link: This tab is used to set all of the Guardian's default settings. The default settings will be used in any of the
8 links where the Default check boxes are checked.
5.9.1 RF LINK
The RF Link panel contains settings for configuring the radio frequency (RF) link.
Rx Frequency
Receive frequency for the Guardian in MHz.
Tx Frequency
Transmit frequency for the Guardian in MHz.
Output Power
Output power of the Guardian's RF link in Watts. Selectable in 1/10th watt increments up to 10 W max.
Bandwidth
Specifies the Bandwidth of the RF Link. Specifies whether the link is a Full Channel (25.0 kHz), Half Channel (12.5 kHz) or
Quarter Channel (6.25 kHz).
| Page 38
Guardian™ Serial Modem or Analog Radio for Licensed Spectrum PN 001-5006-000 Rev. 3
Advertisement
Table of Contents
