Table of Contents
Advertisement
The Guardian allows you to configure up to eight (8) separate Link Configurations for the unit. The Link Configuration
the unit utilizes is selected by the Configuration Select lines on the User connector.
Link Configuration settings are modified from three sections on this window: Modem Settings, RF Link, and COM Port.
When desired parameters in each tab window have been adjusted, click Save Changes to store the parameter
information into local PC memory and close the window.
Clicking Cancel exits the window without modifying any parameters currently stored in local PC memory. Placing a
check in the Default box next to a selection will force that Link Configuration selection to use the setting from the
Default Configuration. Clicking the Default button at the bottom left of the window will reset all settings for the Link
Configuration to the settings selected in the Default Configuration.
Figure 18 Link Configuration Window Default Tab – Modem Mode
This tab is used to set all of the Guardian Modem's default settings. The default settings will be used in any of the 8
links where the Default check boxes are checked.
| Page 29
Guardian™ Serial Modem or Analog Radio for Licensed Spectrum PN 001-5006-000 Rev. 3
Advertisement
Table of Contents
