Table of Contents
Advertisement
PPTP Client Configuration
PPTP Client:
Selecting Enable will allow the PPTP functionality. Selecting Disable will shut off PPTP functionality.
Set Default Route to PPTP:
Selecting Enable will route all IP traffic through the PPTP connection. Selecting Disable will not route
IP traffic through the PPTP connection.
PPTP Server:
The IP address of the VPN server listening for inbound connections.
Username:
The username required by the VPN server.
Password:
The password, associated with the username, required by the VPN server.
The SAVE button must be pressed for changes to take effect.
PPTP Server Configuration
PPTP Server:
Selecting Enable starts our VPN server listening for an inbound connection, and selecting Disable
stops it.
Server Local IP:
The IP address that our modem gives the remote client.
Client IP Range:
The pool of IP addresses assigned to remote clients.
Protocols Allowed:
Selecting a protocol will instruct the VPN server to accept clients who use that authentication
protocol. The server will reject clients using any of the un-selected protocols.
Encryption:
Selecting 'Use MPPE' will enable Microsoft Point-to-Point Encryption for communication between the
server and clients. This option requires the MS-CHAP or MS-CHAPv2 protocol.
The SAVE button must be pressed for changes to take effect.
PPTP Server User Configuration
Full Name:
This name can be used as a more descriptive name for a client. It is not used by the server. No
spaces are allowed in the name.
Username:
The name used by a client to log in to the server.
Password:
The password, with associated username, used by a client to log in to the server.
Page 41 of 62
Advertisement
Table of Contents
