Logicube SuperSonix User Manual page 9

Logicube SuperSonix User's Manual
Two UDMA cables (5" and 9") for connecting
•
the Master and Target drives to the Logicube
SuperSonix.
One extra 5" UDMA test cable in a sealed bag.
•
NOTE: Please do not remove the test cable
•
from the sealed bag unless requested to do so
by a Logicube Technical Support
representative.
Two PC-style accessory power cables (one 5"
•
and one 9") for connecting the Master and
Target drives to the SuperSonix.
Two SATA cables, one short and one long, for
•
attaching SATA drives to your Logicube
SuperSonix.
One FireWire cable and one USB cable
•
A System CompactFlash card for software
•
updates
Two CDs containing:
•
A backup copy of the software that is already
•
pre-installed on the Logicube SuperSonix and
an electronic copy of this manual.
A CD boot disk that contains the USB Cloning
•
software for copying drives through a
computers USB port.
A screwdriver and Mag-Lite® flashlight for
•
opening and looking inside a PC.
A vacuum-formed carrying case.
•
NOTE: It is recommended that you always use
•
the carrying case to store and carry the
Logicube SuperSonix.
GETTING STARTED
9