Wipeclean Target Step-By-Step - Logicube SuperSonix User Manual

Logicube SuperSonix User's Manual
By default, WipeClean is set to erase data
according to Department of Defense (DoD)
specification M-5220.
Set the number of passes to 0 for a single pass of
the chosen pattern. This method is acceptable for
quickly wiping a drive where removal of sensitive
information is not an issue.
Use the Value Icon to change the value
written during the last pass of the wipe. Your
choices are:
0xf6(The DoD default)
0x00
0xff
Random
(The Random setting will fill the Target drive with a
pseudo random pattern.)

Wipeclean Target Step-by-Step

1. From within the Settings Menu tap
Diagnostics icon.
2. Locate and tap
icon.
3. You will now see preference settings for
Passes, Value and Speed. Adjust these as
needed for each setting.
4. Tap the Start icon.
5. A message will appear stating that the unit is
accessing the target drive. The erase
process will then start and display the Mode,
Speed, number of passes requested and the
final pattern to be written.
6. The Logicube SuperSonix will notify you
when erasing is complete.
OMNIDIAGNOSTICS
the
the WipeClean Target
51