Cloning Windows Vista; Vista Installations - Logicube SuperSonix User Manual

CLONING MODES AND SETTINGS

Cloning Windows Vista

36
Mirror/Clever
with no resize
System Restricted 100Mb
Rest of
Regular 'C:'
drive
The 'system restricted' partition contains the
Windows 7 bootloader and it knows about 'c:'
seemingly by an absolute offset, therefore it is
necessary to keep the starting location of 'C:' within
the drive the same. The same reasoning goes for
the other scenarios above; this is why we always
keep the starting offset of 'C:' the same as the
master drive.
With the release of the Windows Vista operating
system in late 2006, Microsoft has added some
security features to protect the integrity of the
partition. These features can cause problems when
cloning Vista with CleverCopy mode.
This section will discuss the best ways to clone
Windows Vista hard drives. These instructions apply
to all flavors of Windows Vista (Windows Home
Basic, Windows Home Premium, Windows Business
and Windows Ultimate).
NOTE: Software dated 2008 or later and NTFS
CleverCopy mode need to be installed on the
SuperSonix in order to CleverCopy Windows
Vista.

Vista Installations

The following Vista installations are supported by
CleverCopy mode:
• Upgrade of a Windows XP SP2 drive.
• Dual Boot scenario with Windows XP on the
second partition.
System Restricted
Clever with
resize
Regular 'C:'
Logicube SuperSonix User's Manual
100Mb